หมวดหมู่: ACN Newswire

Saskatoon, Saskatchewan--(ACN Newswire via SeaPRwire.com - April 27, 2026) - Buffalo Potash Corporation (TSXV: BUFF) (OTCQB: BLPTF) (the "Company" or "Buffalo") is pleased to announce the completion of a Preliminary Economic Assessment ("PEA") and concurrent release of its maiden 43-101 Mineral Resource Estimate for its 100%-owned Disley Potash Project (the "Disley Project"), located in Saskatchewan, Canada.The PEA has been filed and can be found under the Company's profile on SEDAR+ (www.sedarplus.ca) and on the Company's website (www.buffalopotash.ca).PEA & Mineral Resource Estimate Highlights Total production of 1,000,000 tonnes per annum (TPA) of K62 granular-grade Muriate of Potash (MOP) and 125,000 TPA of K62 soluble grade MOPAfter-tax NPV(1)(8) of US$1.1B and IRR(1) of 30%US$639M initial CAPEX estimate, including US$128M in contingencyEstimated US$55/t MOP OPEX (Table 4)Measured and indicated tonnage of 1,671.5 million metric tonnes at an average grade of 34.8% KCl, yielding 582 million tonnes of KClOver 50 years of mine life at 1,125,000 TPA based on current resource estimate (Table 2)(2)The advancement of a Feasibility Study ("FS") for Disley East and Disley West (the "HLD Mines") will run concurrent with Initial Production Module ("IPM") construction, with FS completion representing the key decision gate for proceeding to construction of Disley East and Disley West(3)(2) Based on Measured and Indicated resource estimate of 582Mt at 34.8% KCl.(3) The PEA does not constitute a feasibility study and does not demonstrate economic viabilityMr. Steve Halabura P.Geo., Buffalo Chief Executive Officer, commented: "Since founding Buffalo Potash in 2018, the team and I have invested years of disciplined work — geological, technical, and strategic — to systematically unlock the potential of modular selective solution potash mining in Saskatchewan, the key being Buffalo's Disley Project. Having spent my career working in Saskatchewan potash, I had a strong conviction from the beginning that Disley had a substantial resource endowment, and this Mineral Resource Estimate confirms exactly that. The PEA illustrates both low capex per tonne and operating cost per tonne, as well as setting a new environmental standard for how potash production should look in the 21st century — no tailings stored on surface and minimal freshwater usage." Mr. Halabura continued: "The team and I believe the Disley Project represents the next generation of Saskatchewan potash solution mining and are excited to begin development of the Initial Production Module, which will be the first leg of this buildout and is expected to bring soluble-grade potash production online within the next 12 months. During the development of the Initial Production Module, we will also test our patent-pending Vortex Crystallizer, alongside an industry standard crystallizer, which has the potential to significantly reduce the capex of the Initial Production Module and further potential build-outs. With global attention turning to the security of critical supply chains, the urgency to bring reliable, jurisdiction-stable potash production online has never been greater. This is a proud moment for our team, our shareholders, and the stakeholders that have supported us along the way — and we are just getting started."Table 1: PEA SummaryLine ItemUnitsTotal Project Production Rate MOPTPA1,000,000Production Rate Soluble GradeTPA125,000Total Initial CAPEXUS$ million639CAPEX per Tonne CapacityUS$/tonne568Average Unit OPEXUS$/tonne55MOP Price (25-year avg.)US$/tonne393.6(4)Soluble Grade Price (25-year avg.)US$/tonne373.6(5)Pre-Tax NPV(1) (8%)US$ million1,534.67Pre-Tax IRR(1)%35Post-Tax NPV(1) (8%)US$ million1,085.47Post-Tax IRR(1)%30Steady-State Annual RevenueUS$ million442.5Steady-State Annual EBITDAUS$ million251.0 (4) LoM average price of Granular MOP, produced by Disley East and Disley West(5) LoM average price of Soluble Grade MOP, produced by IPMThe PEA is preliminary in nature and includes inferred mineral resources, which are considered too speculative geologically to have the economic considerations applied to them that would enable them to be categorized as mineral reserves. There is no certainty that the PEA will be realized.PEA & Mineral Resource Estimate OverviewThe PEA was prepared by Micon International Co Limited ("Micon") in accordance with National Instrument 43-101 Standards of Disclosure for Mineral Projects and evaluates the development of the Disley Project as a phased potash solution mining operation. The PEA has an effective date of April 15, 2026 and is based on a Mineral Resource Estimate ("MRE") developed concurrently by Micon with an effective date of April 15, 2026, incorporating historical assay data from legacy drilling programs as well as results from Buffalo Potash's 2026 confirmation drill program. The PEA contemplates a phased development approach across three production facilities on the Disley property:The Initial Production Module ("IPM") - is a low-capital entry point designed to bring 125,000 tonnes per year of soluble grade MOP to market;Disley East - a full-scale HLD Mine on the east segment of the Disley Project, with a production capacity of 500,000 tonnes per year of granular MOP; andDisley West - a full-scale HLD Mine on the west segment of the Disley Project, with a production capacity of 500,000 tonnes per year of granular MOP.Successful construction of the IPM is anticipated to provide technical data used in the completion of the concurrent FS and would, subject to the results from the FS and a positive construction decision, be followed by the potential concurrent development of the Disley East and Disley West HLD solution mines. If fully developed, the Disley Project is designed to have the capacity to produce 1,000,000 TPA of granular MOP and 125,000 TPA of soluble grade MOP ("Full Production Capacity").The MRE indicates a resource base that substantially exceeds the project's current design requirements, which, if successfully developed, would position the Disley Project as a long-life asset. This is consistent with the generational mine lifecycles typically associated with Saskatchewan potash operations, though there is no certainty that resources will be converted to reserves or that any particular mine life will be achieved.Table 2: Mineral Resource EstimateCategoryTonnage (Mt) Avg KCl GradeAvg K2O GradeKCl (Mt)K2O (Mt)Measured399.734.82%22.00%139.287.9Indicated1,267.434.84%22.01%441.5278.9Inferred2,663.234.96%22.08%930.9588.1 Table 2 Notes:The effective date of this MRE is April 15, 2026.Dr. Ryan Langdon, Ph.D, CGeol, of Micon is the QP responsible for this MRE.The MRE has been classified in the Measured, Indicated and Inferred categories.An average specific gravity (SG) value of 2.08 g/cm3 was used.Conversion between KCl and K2O was made using the formula KCl = K2O * 1.583The MRE used economic assumptions for HLD mining. A deduction was made to account for the presence of mining anomalies not detected by existing drill holes and seismic lines. The values used are 5% for Measured, 9% for Indicated and 25% for Inferred.The block model supporting the resource is orthogonal and has a block size of 50 m x 50 m x 0.9 m.The mineral resources described above have been prepared in accordance with the current Canadian Institute of Mining, Metallurgy and Petroleum Standards and Practices.Numbers have been rounded to the nearest million tonnes. Differences may occur in totals due to rounding.Mineral Resources are not Mineral Reserves as they do not have demonstrated economic viability. The quantity and grade of reported Inferred Mineral Resources are uncertain in nature and there has been insufficient exploration; however, it is reasonably expected that a significant portion of Inferred Mineral Resources could be upgraded into Indicated Mineral Resources with further exploration.Micon's QP has not identified any legal, political, environmental, or other factors that could materially affect the potential development of the mineral resource estimate.Figure 1: Core Samples from the 7-10 Hole on the Disley ProjectTo view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/12107/294332_592822e3642ebbb0_001full.jpgMining MethodBuffalo intends to develop the Project using solution mining, a well-established approach that has been successfully deployed across Saskatchewan for more than 50 years. Solution mining is widely recognized as a reliable and efficient technique for extracting potash from laterally continuous deposits, notably used at both neighboring properties of the Disley Project — the K+S Bethune mine and the Mosaic Belle Plaine mine.Building on this proven foundation, Buffalo holds a patent on an enhanced solution mining approach known as Horizontal-Line-Drive Selective Solution Mining ("HLD Mining"), which is the installation of commercially proven oil and gas injection systems within horizontal wells. This method is designed to optimize efficiency, reduce overall capital intensity, and significantly limit freshwater requirements, while remaining grounded in the principles of traditional solution mining.Following underground dissolution, potash-rich brine is recovered to surface and processed through crystallization, drying, and compaction to produce a finished potash product ready for local delivery or export via existing road and rail infrastructure that currently runs adjacent to the Disley Property.Initial Capital Expenditure (CAPEX) The initial capital cost estimate has been prepared in line with the Class 4 definition outlined by AACE International standards, with a contingency of 25% applied to the IPM, Disley East, and Disley West components.Mechanical equipment represents the largest component of initial capital expenditure at approximately 38% of Total Project initial CAPEX. For Disley East and Disley West, the mechanical scope encompasses the full processing train required to produce export-grade granular MOP, including crystallization, debrining and drying, compaction and glazing, soluble product screening, and product storage and loading. For the IPM, the mechanical scope includes a crystallizer, pumps, tanks, pipework, centrifuge, dryer, and baghouse. Total initial capital expenditure across all three facilities is US$639 million, as summarized in the table below.Table 3: Initial CAPEX SummaryDescription IPMDisley EastDisley WestTotal Project(US$ million)(US$ million)(US$ million)(US$ million)Site Works0.711.311.323.3Concrete-5.65.611.2Structural Steel1.29.39.319.9Mechanical15.1113.3113.3241.7Piping0.214.914.930.0Electrical-15.015.029.9Instrumentation0.12.92.95.9Architecture0.019.619.639.2Minor Mechanical4.72.42.49.4General Construction1.413.313.328.0Indirects-36.136.172.3Contingency5.860.960.9127.7Total Capital Expenditure(6)29.2304.7304.7638.6  (6) For modelling purposes, the total capital expenditure estimate for the PEA assumes use of an industry standard crystallizer instead of Buffalo's patent-pending Vortex Crystallizer.Sustaining capital of US$483 million (US$17/t MOP) over the life of mine comprises an annual provision of 2% of original fixed plant and surface infrastructure costs, plus US$10/t MOP for the drilling, completion and tie-in of replacement wells — the dominant component of sustaining capital — based on each set of three wells yielding 500,000 tonnes over an approximate 5-year useful life.Operating Expenses (OPEX)Buffalo Potash's estimated operating cost of US$55/t MOP reflects the structural advantages of operating in Saskatchewan, a mature potash jurisdiction with competitive industrial energy rates, an established skilled workforce, and existing road and rail infrastructure adjacent to the Disley Property enabling low-cost delivery to both domestic and export markets. Buffalo management anticipates these fundamentals position the Disley Project to be among the lowest-cost potash producers upon reaching full production.Table 4: OPEX SummaryItemDescription1,125,000 TPA(US$ million)IPM Contingency$14.49/t applied to IPM production only1.8Wellfield Power500 Hp at $0.063/kWh1.8Processing Power19,356 Hp at $0.063/kWh18.0Drilling$25,000/day; 45 days/yr0.1Pipes, Pumps, ValvesSteaming & general maintenance0.8InstrumentationMonitoring & controls0.4Labour32 staff7.8Natural Gas$386/1000m³ incl. carbon tax19.6Maintenance5% of major equipment capital5.4ReagentsDedust oil & anticake amines2.0Water$2.20/m³; 45 m³/hr1.3General & Admin SupervisionManagement & safety1.9Admin SuppliesOffice & admin supplies0.8Total Annual OPEX61.7OPEX US$/t MOP55 / tonne Economic AssumptionsThe economic analysis evaluates the Disley Project as a phased development consisting of the IPM to establish early cash flow, followed by the full-scale HLD Mine comprising Disley West and Disley East. The IPM was evaluated as a standalone project, with the HLD Mine (Disley East and Disley West) assessed on an incremental basis and in combination with the IPM as an overall project. A Discounted Cash Flow ("DCF") model was constructed with the following assumptions:All costs and revenues are expressed in constant, first quarter 2026 money terms, with no provision for escalation or inflation;Capital and operating cost estimates denominated in Canadian dollars have been converted to US dollars at an exchange rate of CAD 1.38 per USD;A discount rate of 8% has been applied on an all-equity basis;The pre-tax results presented include the Saskatchewan Potash Production Tax (PPT) and royalties but exclude federal and provincial corporate income tax. The after-tax results include corporate income tax (Saskatchewan 12%, Federal 15%);The IPM ramps up over 3 months at 50% of nominal capacity; Disley West and Disley East have a 6-month ramp-up period at 50% of capacity, with the Disley East being deferred by a 3-month offset from the West Section;It is assumed the IPM is scheduled to begin construction July 2026 with commercial operations starting January 2027;It is assumed that a positive construction decision will be reached on Disley West and Disley East. Disley West is scheduled to begin construction July 2027, with operations beginning July 2029. Construction at Disley East is scheduled to be the final facility developed, with construction beginning October 2027 and operations beginning October 2029;Soluble grade MOP produced by the IPM is sold locally, incurring a transport cost of US$10/t compared to US$43/t for export grade granular MOP railed FOB Vancouver; soluble grade MOP is priced at a US$20/t discount to granular, reflecting a life-of-mine average of US$373.6/t versus US$393.6/t FOB Vancouver;In addition to MOP, the IPM will produce 50,000 m³ per year of KCl brine that may be attractive to regional oilfield services customers at an average transport cost of US$10/m³;Payback period is measured from the start of construction to the point at which cumulative cash flow turns positive; andAlthough the project's mine life is anticipated to extend beyond a 25-year time frame, the NPV(1) and IRR(1) calculations reflect a 25-year "LoM" period.The primary input parameters for the DCF model are outlined in the table below.Table 5: Summary of Inputs for Economic AnalysisInput ParametersUnitValueEvaluation Base Date - IPMDate2026-07-01Evaluation Base Date - Disley East & Disley WestDate2027-07-01Sales: HLD Mine MOP Sales (granular)TPA1,000,000Sales: IPM MOP (soluble)TPA125,000Sales: KCl Brinem3/yr50,000Price: Granular MOP (FOB Vancouver) 25-year averageUS$/t394Price: Soluble MOP 25-year averageUS$/t374Price: KCl BrineUS$/m343Transport Costs: Granular MOPUS$/t43Transport Costs: Soluble MOPUS$/t10Transport Costs: KCl BrineUS$/m310Corporate Tax (Sask. + Canada)%27%Contingency for CAPEX%25%Discount Rate%8%NPV calculationYears25 The Disley East and Disley West mines have a start date of construction later than that of the Initial Production Module, and their IRR(1), NPV(1) and Payback periods are all calculated from that later date, while the overall Project results reflect the start date of the IPM. The individual IPM phase has a payback period of 1.1 years, while Disley East and Disley West each respectively have payback periods of 2.9 years. The total Project payback of 4.7 years reflects an earlier calculated start date at the time of first production at the IPM, prior to first production from Disley East and Disley West.Table 6: Summary of OutputsMetricUnitTotal ProjectInitial CAPEXUS$ million639OPEXUS$55 / tonnePre-Tax NPV(1) (8)US$ million1,534Pre-Tax IRR(1)%35%Post-Tax NPV(1) (8)US$ million1,085Post-Tax IRR(1)%30% The Disley ProjectThe Disley Project is located approximately 50km northwest of Regina and covers 10,610 hectares (Crown and Freehold mineral rights). The property is situated immediately adjacent to the east of the K+S Bethune potash solution mine and north of the Mosaic Belle Plaine potash solution mine — both of which are amongst the largest producing potash solution mines in the world. In the opinion of management, the Disley Project is in one of the most favorable areas of Saskatchewan for potash solution mining (see Figure 2) as evidenced by the success of these neighboring projects(6).Figure 2: The Disley Property Situated Amongst Major Potash Solution Mines(7)To view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/12107/294332_592822e3642ebbb0_002full.jpgAbout Buffalo PotashBuffalo Potash is an emerging Saskatchewan-based potash developer pursuing a modular approach to selective solution mining through its patented Horizontal Line-Drive (HLD) technology. Buffalo is advancing the Disley Project — located next to several of the most prominent currently producing potash solution mines in the world — with the objective of establishing capital-efficient, lower-impact potash production in one of the world's leading potash jurisdictions.Qualified PersonThe scientific and technical information contained in this news release has been reviewed and approved by Douglas F. Hambley, PhD, PE, P.Eng., PG, an independent consultant of the Company and Qualified Person as defined under NI 43-101 Guidelines. Dr. Hambley is a globally recognized expert in potash geology and mine development and has assisted Micon in their preparation of the MRE and PEA.All related and pertinent information has also been reviewed for this news release by Jared Galenzoski, P.Geo, FIMMM as an independent consultant and Qualified Person as defined under NI 43-101. Mr. Galenzoski is also an expert in several potash-related fields and has assisted Micon in their preparation of the MRE and PEA.Technical Report and Qualified PersonsFor more information in respect of the Disley Project, including with respect to key assumptions, parameters, and methods used to estimate the MRE, data validation and QA/QC procedures, and the basis, qualifications and assumptions for the PEA, please refer to the entirety of the Technical Report prepared by Ryan Langdon, PhD, P.Geol.; Jack Nagy, PEng; Christopher Jacobs, CEng., MIMMM; and Richard Thompson, CEng, MiChemE. Each of the aforementioned persons is considered a "Qualified Person" for the purposes of NI 43-101 and has reviewed and approved the scientific and technical disclosure contained in this news release. No limitations were imposed on their verification process. Readers are cautioned to review the entirety of the PEA as it contains additional disclosures material to the matters discussed in this press release.Notes(7) The K+S Bethune potash solution mine and north of the Mosaic Belle Plaine potash solution mine (together, the "Adjacent Properties") may each be considered an "adjacent property" (within the meaning of NI 43-101) to the Company's Disley Project. The Company does not have any interest in either of the Adjacent Properties. The Company believes this context is useful in illustrating the proven endowment of the district, while noting that mineralization on adjacent or nearby properties is not indicative of mineralization on the Company's Disley Project. There is no guarantee that the Disley Project will yield comparable results to any of these mines.ContactSteve Halabura, P.Geo. | Chief Executive Officer & DirectorEmail: steve@buffalopotash.ca | Phone: 1-306-220-7715(1) Non-GAAP Financial MeasuresNet Present Value ("NPV") and internal rate of return ("IRR") are forward-looking financial measures used by management to evaluate the economic potential of the Disley Project, as estimated in the PEA. These measures do not have standardized definitions under IFRS and may not be comparable to similar measures disclosed by other issuers.NPV represents the sum of discounted future after-tax cash flows projected over the 25-year evaluation period at a discount rate of 8%, net of initial and sustaining capital expenditures. The most comparable IFRS measure is net income (loss); however, NPV is a forward-looking measure that reflects projected future cash flows and cannot be directly reconciled to historical net income. IRR represents the discount rate at which NPV equals zero across the project's projected cash flows.These measures should not be construed as alternatives to net income, comprehensive income, or cash flows from operations as determined in accordance with IFRS. Readers are cautioned that these measures reflect PEA-level estimates and are subject to the risks and uncertainties disclosed under "Forward-Looking Information" below.Forward-Looking InformationThis news release contains "forward-looking information" and "forward-looking statements" (collectively, "forward-looking information") within the meaning of applicable Canadian securities legislation and the United States Private Securities Litigation Reform Act of 1995. Forward-looking information is generally identifiable by the use of words such as "believes," "may," "plans," "will," "anticipates," "intends," "could," "estimates," "expects," "forecasts," "projects," "targets," "schedules," or similar expressions, and the negative of such expressions.Forward-looking information in this news release includes, but is not limited to, statements regarding: the results, assumptions, and projections contained in or derived from the PEA and Mineral Resource Estimate for the Disley Project, including projected production rates, capital and operating costs, NPV, IRR, payback periods, and mine life; the anticipated timing and phasing of construction and commercial production for the IPM, Disley East, and Disley West; the Company's ability to secure permitting, financing, and all necessary regulatory approvals; the anticipated cost and technical performance of the HLD Mining method; expectations regarding MOP and soluble grade potash pricing, transportation costs, and market access; and the Company's broader development plans and strategy for the Disley Project.Forward-looking information is based on management's reasonable assumptions, estimates, analysis, and opinions made in light of its experience and perception of historical trends, current conditions, and expected future developments, as well as other factors that management believes are relevant and reasonable in the circumstances as of the date such statements are made. Key assumptions underlying the forward-looking information include, but are not limited to: the accuracy of the Mineral Resource Estimate and PEA, including geological, engineering, and cost assumptions; no material adverse changes to commodity prices, exchange rates, or tax and royalty regimes; the availability of financing on acceptable terms; the Company's ability to obtain necessary permits and approvals on anticipated timelines; and the continued availability of equipment, personnel, and infrastructure.Forward-looking information is subject to known and unknown risks, uncertainties, and other factors that may cause actual results, performance, or achievements to differ materially from those expressed or implied, including: the inherent uncertainty of PEA-level studies and the possibility that actual capital costs, operating costs, and production rates differ materially from estimates; changes in potash or fertilizer market prices; fluctuations in currency exchange rates, particularly the Canadian dollar relative to the US dollar; the risk that permitting, financing, or regulatory approvals are not obtained on anticipated timelines or at all; risks related to the development, commissioning, and operation of novel mining technology; risks inherent to solution mining operations; and general business, economic, competitive, political, and social risks and uncertainties.A PEA is preliminary in nature and includes Inferred Mineral Resources that are considered too speculative geologically to have the economic considerations applied to them that would enable them to be categorized as Mineral Reserves. There is no certainty that the PEA will be realized. Mineral Resources that are not Mineral Reserves do not have demonstrated economic viability.Although the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated, or intended. The forward-looking information contained herein is made as of the date of this news release, and the Company disclaims any obligation to update or revise such information except as required by applicable securities laws.Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/294332 Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

HONG KONG, Apr 27, 2026 - (ACN Newswire via SeaPRwire.com) - Standard Chartered and the Hong Kong Trade Development Council (HKTDC) jointly released the latest Standard Chartered Greater Bay Area Business Confidence Index (GBAI), revealing that business sentiment among companies in the Greater Bay Area (GBA) remained stable in the first quarter of 2026 despite ongoing geopolitical and trade headwinds, notably oil price shocks and continued repercussions from the Middle East conflict.Maintaining Momentum Amid HeadwindsThe Q1 findings largely captured activity and business sentiment since the Middle East conflict began in late February, which has remained highly uncertain and weighed on overall business and market sentiment.Despite a reduced appetite for expansion amid persistent geopolitical uncertainties, business sentiment remained steady across the GBA. The “current performance” index for business activity in Q1 edged down marginally to 49.9 from 50.3 in the previous quarter, while the “expectation” index moderated to 50.4 from 51. Both indices hovered around the 50-neutral mark, indicating GBA corporates’ resilience, supported by favourable policies announced by the Chinese Government aimed at boosting the domestic economy, which in turn would partially offset the fallout of the Middle East conflict.The “current performance” index came down mainly driven by “raw material inventory”, “fixed asset investment” and “financing scale”. The latter two readings were believed to reflect more cautious sentiment among businesses in light of the Middle East conflict. Meanwhile, “production/ sales”, “prices of finished goods/ services” and “profits” all experienced quarter-on-quarter expansion.The “expectations” index remained modestly positive, despite heightened external uncertainties. “New orders” held steady at 51.5, while “prices of finished good/ services” rose to 58.5. However, “profits” fell below the 50-watershed level, implying surveyed companies did not view price increases as sufficient to offset a likely rise in energy and material costs.Hong Kong to Sustain a Still-solid Growth PaceBy city, Hong Kong is expected to maintain a solid performance going forward. Although both the “current” and “expectation” sub-indices edged down to 52.7, these readings still comfortably stayed in expansionary territory, supported by improvements in “financial services” and “innovation and technology” sectors.Tommy Wu, Senior Economist, Greater China and North Asia, Standard Chartered, said: “In addition to the initial impact of surging global energy and freight costs, there are concerns about second-round impacts, such as higher input costs and weaker global demand. This is aligned with the latest reading, which shows a 2.3-point decline in “new export orders” to 47.5 for “current performance”, indicating a more cautious outlook for export demand. With the prolonged Middle East conflict, we anticipate global energy prices to be higher for longer and the second-round effects to become more visible in the coming months. These will likely weigh on business sentiment and appetite on making fixed investment. Nevertheless, Hong Kong has once again demonstrated its resilience amid market turbulence, and such resilience is expected to attract more global capital into HKD and Renminbi assets as safe-haven allocation.”Demand-boosting Measures Favour GBA BusinessesThe survey also investigated the impacts of a series of supportive policies from the Chinese government aimed at stimulating domestic demand in its thematic section. Among the new policy measures introduced by the Ministry of Finance in January, most respondents cited “loan interest subsidies for small, medium and micro-sized enterprises” (38.4%), “large-scale equipment upgrade subsidies” (36.9%) and “consumer goods trade-in subsidies” (31.7%) as the top domestic demand-boosting policies likely to have the most positive impact on their business.Wing Chu, Deputy Director of Research, HKTDC, said: “Demand-boosting stimulus is generating tangible benefits for GBA companies, helping to cushion external challenges amid the Middle East conflict. Targeted support, including loan interest subsidies, alongside measures aimed at stimulating consumer spending, is underpinning demand and supporting business activity across the GBA. Overall, policy-led demand support continues to serve as a meaningful tailwind for GBA businesses. While cost pressures and market competition remain key concerns, respondents are considering stepping up investment in talent and market promotion to sustain further business growth.”While many respondents believe stimulative policies could benefit their businesses by boosting online sales (36.6%) and reducing operating costs (33.8%), challenges faced by GBA corporates remain. Specifically, 54.9% of respondents identified labour costs as the biggest pressure point for their businesses, followed by rental costs (41.7%) and market competition (33.3%). Zooming into Hong Kong respondents, market competition was viewed as a more pressing challenge than rental costs, likely due to the increase in cross-border travel and change in consumption behaviours in recent years. In these circumstances, 38.7% would prioritise their investment in talent recruitment, followed by market promotion (38.1%) and personnel training (36.7%).About the GBAIThe GBAI is the first forward-looking quarterly survey in the market that looks at the business sentiment and synergistic effects in cities and industries across the GBA. It is compiled based on a survey of more than 1,000 companies in the GBA covering the manufacturing and trading, retail and wholesale, financial services, professional services and innovation and technology sectors. The index enables investors and businesses to better understand the current business climate, gauge future performance prospects and formulate their market strategies for the GBA.Related materialsStandard Chartered GBA Business Confidence Index Report: https://www.sc.com/hk/gba/gba-index-report/HKTDC Research: https://research.hktdc.com/en/article/MjMwNjM2MTgxMQReport and photos download: https://bit.ly/4u3izEMWing Chu, Deputy Director of Research, HKTDC (right), and Tommy Wu, Senior Economist, Greater China and North Asia, Standard Chartered (left), announced the latest GBA Business Confidence Index (GBAI) on 27 April 2026.Media enquiriesCorporate Affairs DepartmentStandard Chartered Bank (Hong Kong) Limited Flora Chiu Tel: (852) 3843 2285 Email: flora.chiu@sc.com   Communications & Public Affairs DepartmentHKTDC Christy LeeClayton Lauw Tel: (852) 2584 4369Tel: (852) 2584 4472Email: christy.wn.lee@hktdc.orgEmail: clayton.y.lauw@hktdc.orgAbout Standard CharteredWe are a leading international banking group, with a presence in 54 of the world’s most dynamic markets. Our purpose is to drive commerce and prosperity through our unique diversity, and our heritage and values are expressed in our brand promise, here for good.Standard Chartered PLC is listed on the London and Hong Kong stock exchanges.The history of Standard Chartered in Hong Kong dates back to 1859. It is currently one of the Hong Kong SAR’s three note-issuing banks. Standard Chartered incorporated its Hong Kong business on 1 July 2004, and now operates as a licensed bank in Hong Kong under the name of Standard Chartered Bank (Hong Kong) Limited, a wholly owned subsidiary of Standard Chartered PLC.For more stories and expert opinions please visit Insights at sc.com. Follow Standard Chartered on X, LinkedIn, Instagram and Facebook.About HKTDCThe Hong Kong Trade Development Council (HKTDC) celebrates its 60th anniversary this year. The HKTDC is a statutory body established in 1966 to promote, assist and develop Hong Kong's trade. With over 50 offices globally, including 13 in the Chinese Mainland, the HKTDC promotes Hong Kong as a two-way global investment and business hub. The HKTDC organises international exhibitions, conferences and business missions to create business opportunities for companies, particularly small and medium-sized enterprises (SMEs), in the mainland and international markets. The HKTDC also provides up-to-date market insights and product information via research reports and digital news channels. For more information, please visit: www.hktdc.com/aboutus. Follow us on  @hktdc and  LinkedIn Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

SHENZHEN, Apr 27, 2026 - (ACN Newswire via SeaPRwire.com) - China Medical System Holdings Limited (“CMS” or the “Group”) is pleased to announce that, the Group through its wholly-owned subsidiary entered into an exclusive commercialization and supply agreement (the “Agreement”) with Pharmacosmos A/S for Iron Isomaltoside Injection (“Monofer®”) and Iron Dextran Injection (“Cosmofer®”) recently. In accordance with the Agreement, the Group has obtained an exclusive right to commercialize the products in the People’s Republic of China (for the purpose of this Agreement, excluding the Hong Kong Special Administrative Region, the Macau Special Administrative Region and Taiwan region). Pharmacosmos A/S will continue to manufacture and supply the products. The cooperation term shall be fifteen years from the effective date stipulated in the Agreement, which may be extended upon mutual agreement between the parties prior to expiry.The two intravenous iron therapies under this cooperation are both originator products that have been approved for marketing in China and included in the China’s National Reimbursement Drug List (NRDL). Among them, Monofer® is an exclusive drug and the first third-generation intravenous iron therapy approved for marketing in China. It features an innovative and more stable matrix-like nanostructure and provides a superior safety profile[1]. Its single-dose full iron replenishment significantly reduces the number of infusions, enables faster improvement in hemoglobin levels and enhances clinical convenience. Another product, Cosmofer®, is currently the only intravenous iron therapy included in Category A of the NRDL and also the only one included in the National Essential Medicines List (NEML). With many years of accumulated clinical use, its efficacy and safety have been supported by accumulated clinical experience and published data.The above two products will form a comprehensive intravenous iron product portfolio covering all channels and treatment scenarios, which can support meeting the clinical needs of different levels of healthcare institutions and different types of iron deficiency anemia (IDA) patients, providing more diversified, safe and effective treatment options for patients. Patients with iron deficiency (ID) and IDA are widely distributed across multiple clinical departments, including gastroenterology, cardiology, nephrology, obstetrics and gynecology, and orthopedics, which are all key specialty areas of the Group. The addition of the two products will generate efficient synergies with the Group’s existing marketed products in expert resources and academic promotion network, further strengthening the Group’s overall competitiveness in the field of anemia treatment, and is expected to have a positive impact on the Group’s performance.More information about Monofer®Monofer® was approved on 30 January 2021 for the treatment of iron deficiency in patients where oral iron preparations are ineffective, cannot be used, or where there is a clinical need for rapid iron supplementation. In 2023, Monofer® was included in the NRDL as a Category B reimbursable drug. Monofer® consists of nanoparticles with a stable, matrix-like structure composed of interchanging layers of iron atoms and short, linear isomaltose carbohydrates. This structure enables controlled iron release with low levels of labile iron, contributing to a favourable safety profile, including a low risk of hypersensitivity reactions and hypophosphatemia. Monofer® can be administered as a high-dose infusion of 1,000 mg or more in a single visit, whereas older therapies such as iron sucrose typically require repeated administrations of 100 to 200 mg. This enables full iron repletion in one treatment, reducing the need for multiple infusions, lowering the burden on patients and healthcare systems, and increasing infusion capacity. At the same time, the low risk of hypophosphatemia helps avoid complications such as fractures and supports recovery from fatigue, a key symptom of iron deficiency anaemia.More information about Cosmofer®Cosmofer® is a second-generation low-molecular-weight iron dextran injection. It was approved for marketing in Mainland China in 2003 and is indicated for patients with iron deficiency who cannot take oral iron preparations (such as those who are intolerant to oral iron or have unsatisfactory therapeutic outcomes). Cosmofer® also allows single-dose high-dose iron repletion. With many years of accumulated clinical use, its efficacy and safety have been supported by accumulated clinical experience and published data. Its dual status as a Category A NRDL-listed product and NEML supports its core role in iron supplementation in primary healthcare settings.About Iron Deficiency and Iron Deficiency AnemiaID and IDA are global health issues that commonly affect children, premenopausal women (particularly pregnant women) and the elderly. These conditions may impair the function of multiple organ systems, leading to a series of health problems such as growth retardation, behavioral disorders, cognitive impairment, reduced physical capacity, and peri-natal and peri-operative complications. They also significantly affect the prognosis of chronic diseases such as gastrointestinal diseases, chronic kidney disease, heart failure and tumors[2]. More than 1 billion people live with iron deficiency anaemia[3], making it one of the leading contributors to the global burden of disease[4]. Data from the Fourth National Nutrition Survey in China indicate that the prevalence of IDA among Chinese residents is 20.1%[5]. However, both patients and healthcare professionals have insufficient awareness of the disease. Less than 20% of patients with mild anemia receive diagnosis and treatment, while only about 50% of patients with severe anemia receive appropriate diagnosis and treatment[2]. This indicates significant underdiagnosis and undertreatment of ID/IDA. Iron supplementation is the standard treatment for ID/IDA and includes oral iron therapy and intravenous iron therapy. Intravenous iron therapy is an important option for patients who cannot tolerate oral iron, have inadequate response to oral therapy, require rapid iron repletion, or prefer full iron supplementation within one to two administrations[1,2,6]. However, due to insufficient awareness of IDA, patient adherence issues, hospitalization constraints, infusion convenience, and safety concerns regarding intravenous iron therapies, the clinical use of intravenous iron in China remains relatively conservative. A Chinese real-world study shows that the average total dose of iron sucrose used in IDA patients was approximately 511 mg, which was significantly lower than the target dose of 1,000 mg[2]. There is therefore a significant clinical need for intravenous iron therapies that offer high safety, strong demonstrated efficacy and single-dose full iron repletion. Monofer® and Cosmofer® together establish a comprehensive intravenous iron product portfolio covering multiple treatment scenarios, providing tiered treatment options for patients with iron deficiency anemia.About Pharmacosmos A/SPharmacosmos A/S is a global leader in carbohydrate chemistry and innovative treatments for iron deficiency and iron deficiency anemia. Leveraging its deep expertise in carbohydrate chemistry and cell cycle biology, the company is committed to developing innovative therapies to address unmet patient needs, with a particular focus on iron metabolism and hematology-related diseases. Pharmacosmos A/S was founded in 1965 and is headquartered in Denmark, and employs more than 700 specialists from the United Kingdom, Ireland, the Nordic countries, Germany, the United States, Canada and China. With excellent product quality and strong clinical value, its core iron therapy products have been approved and widely used in multiple countries and regions worldwide, establishing strong technological capabilities and a solid market reputation.About CMSCMS is a platform company linking pharmaceutical innovation and commercialization with strong product lifecycle management capability, dedicated to providing competitive products and services to meet unmet medical needs.CMS focuses on the global first-in-class (FIC) and best-in-class (BIC) innovative products, and efficiently promotes the clinical research, development and commercialization of innovative products, enabling the continuous transformation of scientific research into clinical practices to benefit patients.CMS deeply engages in several specialty therapeutic fields, and has developed proven commercialization capabilities, extensive networks and expert resources, resulting in leading academic and market positions for its major marketed products. CMS continues to promote the in-depth development in its advantageous specialty fields, strengthening the competitiveness of the cardiovascular-kidney-metabolic/gastroenterology/ophthalmology/skin health businesses, bringing economies of scale in specialty fields. Among them, the skin health business (Dermavon) has become a leading enterprise in its field, and is proposed to be listed independently on the SEHK. Meanwhile, CMS continuously promotes the operation and development of its integrated R&D, manufacturing and commercialization chain in Southeast Asia and the Middle East, capturing growth opportunities in emerging markets to support the high-quality and sustainable development of the Group.Reference:1. Chinese Pharmacological Society Professional Committee of Drug‑induced Diseases, Guangdong Pharmaceutical Association. Expert consensus of clinical application and pharmaceutical care for intravenous iron agents (2024) [J]. Adverse Drug Reactions Journal, 2025, 27(3): 129-141. DOI: 10.3760/cma.j.cn114015⁃20240929⁃000702. Liao Minjing, Zhang Liansheng. Standardized diagnosis and treatment of iron deficiency and iron‑deficiency anemia [J]. Chinese Journal of Internal Medicine, 2023, 62(6): 722-727. DOI: 10.3760/cma.j.cn112138-20230210-00074.3. Global Burden of Disease Collaborative Network. Global Burden of Disease Study 2019 (GBD 2019) Results. Seattle, United States: Institute for Health Metrics and Evaluation (IHME); 2020. Available from http://ghdx.healthdata.org/gbd-results-tool.4. Pasricha SR, Tye-Din J, Muckenthaler MU, Swinkels DW. Iron deficiency. Lancet. 2021 Jan 16;397(10270):233-248.5. Li Lijuan, Zhang Liansheng. Considerations on the standardized diagnosis and treatment of iron‑deficiency anemia [J]. National Medical Journal of China, 2021, 101(40): 3266-3270. DOI: 10.3760/cma.j.cn112137-20210609-01319.6. Red Blood Cell Disease (Anemia) Group, Chinese Society of Hematology, Chinese Medical Association. Multidisciplinary expert consensus on the diagnosis, treatment and prevention of iron deficiency and iron deficiency anemia (2022 edition) [J]. National Medical Journal of China, 2022, 102(41): 3246-3256. DOI: 10.3760/cma. j.cn112137-20220621-01361.CMS Disclaimer and Forward-Looking StatementsThis press release is not intended to promote any products to you and is not for advertising purposes. This press release does not recommend any drugs, medical devices and/or indications. If you want to know more about the diagnosis and treatment of specific diseases, please follow the opinions or guidance of your doctor or other medical and health professionals. Any treatment-related decisions made by healthcare professionals should be based on the patient’s specific circumstances and in accordance with the drug package insert.This press release which has been prepared by CMS does not constitute any offer or invitation to purchase or subscribe for any securities, and shall not form the basis for or be relied on in connection with any contract or binding commitment whatsoever. This press release has been prepared by CMS based on information and data which it considers reliable, but CMS makes no representation or warranty, express or implied, whatsoever, and no reliance shall be placed on, the truth, accuracy, completeness, fairness and reasonableness of the contents of this press release. Certain matters discussed in this press release may contain statements regarding the Group’s market opportunity and business prospects that are individually and collectively forward-looking statements. Such forward-looking statements are not guarantees of future performance and are subject to known and unknown risks, uncertainties and assumptions that are difficult to predict. Any forward-looking statements and projections made by third parties included in this press release are not adopted by the Group and the Company is not responsible for such third-party statements and projections.Media ContactBrand: China Medical System Holdings Ltd.Contact: CMS Investor RelationsEmail: ir@cms.net.cnWebsite: https://web.cms.net.cn/en/home/ Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

Vancouver, British Columbia--(ACN Newswire via SeaPRwire.com - April 27, 2026) - Copper-gold explorer and hybrid project generator Kincora Copper Limited (ASX: KCC) (TSXV: KCC) (Kincora or the Company) is pleased to announce that it will be holding an Investor Webinar Presentation and Discussion on the afternoon of Tuesday April 28th Pacific Standard Time (PST) and morning of Wednesday 29th Australian Eastern Standard Time (AEST).President & Chief Executive Officer, Mr Sam Spring, will update the market on recent and upcoming drill programs, exploration activities and corporate developments across the project portfolio.Both Kincora shareholders and interested investors are invited to attend the webinar and participate in the accompanying Q&A session.Kincora Copper Investor Webinar Details: Canada(Vancouver)US(Dallas)Australia(East Coast)Date28-Apr-202628-Apr-202629-Apr-2026Time4.00PM PST6.00PM CT9.00AM AEST Please note: Registration is required to attend this Zoom format investor webinar.Please register in advance for the Zoom webinar using the following link:https://us02web.zoom.us/webinar/register/WN_IE079ntuTbmoCUiWm6_O5QAfter registering, you will receive a confirmation email containing information about joining the webinar.Questions can be submitted in advance of the webinar to Julia Maguire of The Capital Network via the following email address: julia@thecapitalnetwork.com.auA replay of the webinar will be available on Kincora's website on the following page:https://kincoracopper.com/interviews/About Kincora: Kincora Copper Limited (ASX: KCC) (TSXV: KCC) is an emerging Australia-focused gold-copper explorer with a hybrid project generator strategy.The Company is successfully proving up the prospectivity of its extensive project portfolio, which includes multiple district-scale landholdings and scalable drill ready targets. These assets are located in Australia's Lachlan Fold Belt and Mongolia's Southern Gobi, two of the globe's leading porphyry belts, and the historical Condobolin mining field within the Cobar basin in NSW.The Company has already unlocked over $100 million of potential partner funding for multiple earlier stage and/or non-core porphyry projects. These initial deals have supported over 18,000 metres of drilling and over A$9m of partner funded exploration since late 2024, with management fees and exploration ramping up.Partner discussions are ongoing for its remaining 100% owned flagship projects that are all situated within existing porphyry camps containing over 20-million-ounce gold equivalent resource inventory.By having a significant portfolio of partner funded large porphyry projects, and a very focused capital efficient programs at the Condobolin and other sole funded projects, the Company is seeking to position Kincora as a leading institutional grade explorer in the public Australian and Canadian markets, and the leading project generator on the ASX.The Company's website is: www.kincoracopper.comThis announcement has been authorised for release by the Board of Kincora Copper Limited (ARBN 645 457 763)For further information please contact:Sam Spring, President and Chief Executive Officersam.spring@kincoracopper.com or +61431 329 345 Laurie Thomas, Strategic Advisor laurie.thomas@kincoracopper.com or +1306 341 3826 Media contactJulia Maguire, Managing Director, The Capital Networkjulia@thecapitalnetwork.com.au or +61 2 7257 7338Executive office Subsidiary office Australia 400 - 837 West Hastings Street C/- JM Corporate ServicesVancouver, BC V6C 3N6, Canada Level 6, 350 Collins StreetTel: 1.604.283.1722 Melbourne, VIC, Australia 3000 Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) or the Australian Securities Exchange accepts responsibility for the adequacy or accuracy of this release.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/294246 Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

HONG KONG, Apr 27, 2026 - (ACN Newswire via SeaPRwire.com) - The Hong Kong Trade Development Council (HKTDC) today officially opened its seven flagship lifestyle and licensing events. The Hong Kong Gifts & Premium Fair, Home InStyle and Fashion InStyle are being held at the Hong Kong Convention and Exhibition Centre (HKCEC), while the Hong Kong International Printing & Packaging Fair and DeLuxe PrintPack Hong Kong at AsiaWorld-Expo, from today until 30 April. The Hong Kong International Licensing Show and Asian Licensing Conference are running concurrently from today until 29 April, also at HKCEC. Together, the six trade fairs have attracted some 5,600 exhibitors from over 30 countries and regions. HKTDC Executive Director Sophia Chong said: "Hong Kong has long served as the key gateway for global businesses connecting with the Chinese Mainland, playing the role of super connector and super value-adder that bridges the Chinese Mainland's vast market with the rest of the world. Backed by its solid strengths, well developed innovation ecosystem and robust intellectual property infrastructure, Hong Kong is the ideal base for companies to grow their businesses, pursue creativity and innovation, and bring them to commercial fruition."Creative gifts and home products converge; Gifts & Premium Fair and Home InStyle serve as platforms for new product launchesThe Gifts & Premium Fair and Home InStyle continue to offer buyers a diverse range of gifts and home products spanning cultural creativity, sustainability, innovative materials and gerontechnology. Selected highlights from both fairs are brought together on the new "Reimagine" themed floor at HKCEC Hall 5, giving buyers a one-stop overview of the latest global trends in lifestyle homeware and gifting products, while inspiring the industry to envision future product possibilities with fresh perspectives and inspiration.Both fairs are also attracting exhibitors to unveil latest products. Wei Yit Vacuum Flask Manufactory (Booth: 1E-D02), an exhibitor at the Gifts & Premium Fair, is debuting the Camel Brand MINI20 thermos blind box, created by Hong Kong illustrator Pen So and Hong Kong contemporary artist Jerry Cho. With the Camel Brand celebrating its 85th anniversary – the same year as Bruce Lee’s 85th birth anniversary - the exhibitor is also launching another special co-branded thermos.   Home InStyle exhibitor PREN Ltd (Booth: 5E-C20) is making its first-ever public introduction of an infection-prevention mobile toilet — an installation-free, waterless unit requiring no repeated disinfection and no direct contact with waste before and after use, incorporating health monitoring capabilities that seamlessly bring professional care into modern households.Gifts & Premium Fair spotlights design-led giftsThe Hall of Fine Designs at the Gifts & Premium Fair, located at HKCEC Hall 1, once again gathers over 100 local and international exhibitors, featuring premium, design-led products ranging from stationery and home accessories to smart collectibles incorporating the latest technologies. Star Industrial Co., Ltd (Booth: 1C-G03) presents the Red A "Made in Hong Kong" mini-series blind boxes, evoking nostalgic memories of Hong Kong daily life from the 1960s to the 1990s through iconic household items. Moral Team Holdings Ltd (Booth: 1C-E05) introduces the Napier Coded backpack designed for pickleball enthusiasts, crafted from recycled materials and combining sports with sustainability elements.Home InStyle shapes the future of home livingFunded by the Innovation and Technology Commission, Home InStyle this year presents the Gerontech and Innovative Material Pavilion (Booth: 5E-C20), showcasing over 20 local enterprises to feature gerontechnology products, smart living solutions and home products made from innovative materials.Scan Infinity Ltd presents the TechFitX Smart Sports Training System, which uses interchangeable modules and gamified training to help seniors easily build an exercise routine at home. The United Nations University Hub on Humanitarian Innovation and Technology at Lingnan University showcases IntuCREW, a smart power-assist solution designed to reduce the physical burden on caregivers when maneuvering wheelchairs. Other highlights include Sinomax's bionic ultrasonic sleep soother, German Pool's Natural Wellness Machine, and Afontane's self-cleaning bedding system.On the innovative materials front, Lotux International Holdings Co., Limited’sbiodegradable tableware and food containers are made from lotus stems alongside lotus fibre deodorising cat litter; Editecture showcases the reEDIT upcycled chair made from recycled plastic bottles and bottle cap fragments; and Mush Composites presents bio-based tiles produced from agricultural by-products and mycelium for decorative surface applications.Another focal point of Home InStyle, the Cultural and Creative Avenue, gathers design institutions and culturally inspired brands from over 10 countries and regions. Highlights include Indonesia's PT MANAMU ANAIA SUMBA (Booth: 5E-C09A) with its Banoura bracelets; Czech exhibitor Izaak Reich Crystal s.r.o. (Booth: 5E-A14), featuring handcrafted glass with over 150 years of heritage; UK exhibitor Block Design (Booth: 5E-C09B) with double-sided sculptural glass vases; Taiwan exhibitor Karari (Booth: 5E-A18) with incense accessories; and a Macao exhibitor (Booth: 5E-A16) featuring 3D-printed creations. Pantone returns as colour partner, presenting home décor trends through the PANTONE 2026 Colour of the Year "Cloud Dancer".Fashion InStyle showcases global innovation in fashion materialsThe highlighted zone NEXT@Fashion InStyle (NEXT), organised by the HKTDC and sponsored by the HKSAR Government's the Cultural and Creative Industries Development Agency (CCIDA), returns this year to demonstrate how material innovation is driving industry transformation and advancing sustainability across the fashion sector. The Philippines joins as the featured partner, powered by the Philippine Trade and Investment Centre – Hong Kong (PTIC-HK) and the Center for International Trade Expositions and Missions (CITEM). NEXT brings together over 60 exhibitors from across the globe.Exhibitors include Belgium's Bloom Biotech (Booth: 3F-F09), showcasing microalgae leather, the world's first carbon-neutral leather alternative produced through scalable green technology; At Booth: 3F-E04, Finland's Spinnova PLC’s SPINNOVA® is a next-generation textile fibre derived from wood or waste cellulose, and compatible with conventional textile processes and seamlessly blendable with cotton to deliver scalable, recyclable solutions for apparel and beyond; and Vietnam's Thai Son S.P Co., Ltd. (Booth: 3F-F03), has a range of fabrics that includes ramie fabric, a material with over 3,000 years of history and celebrated for its outstanding performance and natural antibacterial properties. The NEXT zone also features exhibitors from Chinese Mainland, Hong Kong, Iceland, Indonesia, Sweden, Thailand, and the United States, among others.Returning as project ambassador, Han Chong, founder and creative director of internationally acclaimed brand self-portrait, leads six local designer brands, each drawing on forward-looking materials selected from eight participating material suppliers to create cross-disciplinary collections. In a first for the project, materials sourced from beyond Hong Kong and Chinese Mainland are incorporated this year, bringing fresh creative momentum to the field of fashion material innovation. For example, design label WILSONKAKI fuses the world's lightest H2 fabric from French supplier Chargeurs PCC, mycelium leather from Indonesian supplier MYCL-Mycotech Lab, and natural fibres from Hong Kong supplier Texwinca Holdings Ltd, to craft everyday pieces that balance lightweight protection with a natural tactile quality through lamination and bonding techniques. The full design collection will be unveiled at tomorrow's NEXT fashion parade.Fashion InStyle also features dedicated zones including the Designer Spotlight, Materials Bazaar, Fashion Accessories, Women in Style, Bridal & Evening Wear, and Athleisure, presenting a rich selection of ready-to-wear and accessories. Glory G International Limited (Booth: 3G-B31) presents its "Resilience" collection  of lightweight suede denim, challenging the conventional perception of heavy denim outerwear; Hong Kong Haiyuan Limited (Booth: 3G-F18) showcases decorative and functional tassel ornaments designed to be attached to handbags, keys and everyday accessories; while Bibi Hanum from Uzbekistan (Booth: 3F-G29) brings traditional silk ikat patchwork wrap skirts.Printing & Packaging Fair and DeLuxe PrintPack Hong Kong present green solutions and high-end craftsmanshipThe Hong Kong International Printing & Packaging Fair and DeLuxe PrintPack Hong Kong,co-organised by the HKTDC and CIEC Exhibition Company (HK) Limited, continue to highlight innovative, eco-friendly and premium printing and packaging solutions. Elements Printing and Packaging Limited (Booth: 3-E01) introduces FSC Transparent Non-plastic packaging products and FSC Glassine Paper Bag, championing plastic-free, recyclable design principles. BSN International Hong Kong Limited (Booth: 3-E02) offers radio frequency identification (RFID) () labels incorporating paper-based inner layers for sustainable design. Guangzhou Xingqiyuan Trading Co., Ltd. (Booth: 3-E11) presents eco-friendly wet-press paper-pulp packaging made from agricultural waste.At DeLuxe PrintPack Hong Kong, Ijen Enterprises Ltd. (Booth: 3-A05) presents 3D rotating music boxes and vintage phonograph gift packaging that integrate music, storage and packaging. Marshallom (Holdings) Limited (Booth: 3-A08) showcases a floral-and-bird paper lantern canister with a dual-purpose design that extends the product lifecycle, alongside the "Victoria Harbour Day & Night" gift box combining light and shadow effects with storage and premium food packaging.Licensing Show launches IP and e-Commerce Support Services zone for the first timeThe Hong Kong International Licensing Show welcomes more than330 exhibitors from Hong Kong, Chinese Mainland and across Asia, showcasing more than 600 brands and intellectual property (IP) projects spanning arts and culture, animation and characters, brand extension, lifestyle, entertainment and sports licensing.  In line with direction of the HKSAR Government's policy to strengthen Hong Kong businesses' competitiveness on cross-border e-commerce, the fair introduces for the first time a dedicated IP and e-Commerce Support Services zone. The zone unites e-commerce platforms, KOLs, marketing and PR firms — including e-commerce platform Digitify Online Growth (Booth: 5G-E04) and marketing firm Matrix Promotion Limited (Booth: 5G-F01) — to support brands and IPs in capitalising on the new opportunities generated by e-commerce growth. Throughout the fair, e-commerce associations will conduct workshops on topics including establishment of e-commerce platforms, global market expansion via e-commerce channels, and livestreaming commerce, equipping the industry to stay ahead of the curve.Headline IPs at the Licensing Show include Potatoz by 9GAG Limited (Booth: 5G-D20), LuLu the Piggy by Toyzeroplus Limited (Booth: 5G-A24), Café de Bollo by Yogurt Studio Ltd. (Booth: 5F-G20), along with Chinese Mainland IP Quby (Booth: 5G-A22), Korean IP LOTTY FRIENDS (Booth: 5F-G36) and Thai IP Warbie Yama (Booth: 5G-A51). Organised by the Innovative Entrepreneur Association (IEA) and sponsored by Cultural and Creative Industries Development Agency (CCIDA) of the HKSAR Government, the Design Licensing and Business (DLAB) Support Scheme again stages the DLAB Hong Kong Pavilion at the Hong Kong International Licensing Show, featuring close to 40 exhibitors showcasing a diverse portfolio of Hong Kong original brands and IPs. The HKTDC also continues its collaboration with the Hang Seng University of Hong Kong, Hong Kong Baptist University and The Hong Kong Polytechnic University, with Hong Kong Design Institute joining as a new partner this year, to present the Hong Kong Licensing Force Showcase, spotlighting the creativity of Hong Kong's emerging talents.The concurrent Asian Licensing Conference invites industry leaders to examine key market developments. Today's programme features Maura Regan, President and CEO of Licensing International, presenting the "Global Licensing Trends to Watch in 2026".  With the FIFA World Cup taking place this year, the conference also welcomes Alessandro Villa, Senior Licensing Manager of FIFA, and Ivan Chan, Founder and CEO of Promotional Partners Worldwide to share the commercial strategies underpinning successful sports licensing. Mark Mao, Executive Vice President and Head of Sales at COVER Corporation will explore how Virtual YouTubers forge connections with GenZ through strategic social media engagement on the next day.Industry seminars and forums explore emerging market opportunitiesTo help industry professionals keep pace with the latest developments, around 60 thematic seminars, buyer forums, product presentations and launch events will be held throughout the fairs, covering trending topics including the silver economy, market trends, culture and innovation, and sustainability.Among the seminar highlights, the Printing & Packaging Fair and DeLuxe PrintPack Hong Kong will present a seminar co-organised by the HKTDC and the Hong Kong Digital Printing Association, titled “From Prompt to Reality: Revolutionizing Visual Design and Printing with Generative AI and Digital Printing”, examining how generative AI and digital printing are driving innovative transformation across the industry. The Gifts & Premium Fair and Home InStyle will host “Re-Gifted: Trends and Triumphs in Sustainable Home & Gift Design”, exploring new directions in sustainable design. Fashion InStyle will stage the seminar “Cultural Fusion in Lifestyle Design: The Surreal Aesthetics of Motifx”, offering the industry the latest market insights, innovative thinking and practical strategies.Photo Download: https://bit.ly/4vQE39EOrganised by HKTDC, the Hong Kong Gifts & Premium Fair, Home InStyle, Fashion InStyle, Hong Kong International Printing & Packaging Fair, Deluxe PrintPack Hong Kong, Hong Kong International Licensing Show and Asian Licensing Conference open today, with the six trade fairs bringing together some 5,600 exhibitors from more than 30 countries and regionsHKTDC Executive Director Sophia Chong delivered the welcome remarks at the opening ceremony of the Hong Kong International Licensing Show and Asian Licensing Conference this morning (27 April)(From left) Commissioner for Cultural and Creative Industries of CCIDA, Drew Lai; Director, Asia Tourism Exchange Centre, Zhang Dong; HKTDC Executive Director, Sophia Chong; Permanent Secretary for Culture, Sports and Tourism, HKSAR Government, Sum Fong Kwang, Vivian; Plan and Policy Analyst Expert Level, Ministry of Culture, Thailand, Narathorn Parndee; and President and CEO of Licensing International, Maura Regan, officiated the opening ceremonyThe Hall of Fine Designs at the Gifts & Premium Fair showcases a premium selection of design-led gifts, including stationery, home products and smart lifestyle items featuring innovative technologyAt Home InStyle, the Gerontech and Innovative Material Pavilion features more than 20 local exhibitors showcasing gerontech products, smart living solutions and innovative materials applied to the homeware and home textilesThe Cultural & Creative Avenue showcases cultural and creative home products from around the world, presenting distinctive brands and designs that celebrate diverse cultural heritagesFashion InStyle this year presents the spotlight zone NEXT@Fashion InStyle, with featured partner the Philippines bringing over 25 exhibitors to showcase local fashion materialsNEXT@Fashion InStyle project ambassador Han Chong (centre) leads six local designer brands in creating fashion collections incorporating selected innovative global materialsBSN International Hong Kong Limited showcases radio frequency identification (RFID) labels with paper-based inner layers at the Printing & Packaging Fair, highlighting both functionality and sustainable designAt DeLuxe PrintPack Hong Kong, Marshallom (Holdings) Limited presents its “Victoria Harbour Day & Night” gift box, a multifunctional design combining decorative lighting, food packaging and storage, inspired by the changing scenery of Victoria HarbourThe Hong Kong International Licensing Show this year introduces for the first time the dedicated IP & e-Commerce Support Services zoneWebsitesHKTDC Media Room: https://mediaroom.hktdc.com/enHong Kong Gifts & Premium Fair: https://www.hktdc.com/event/hkgiftspremiumfair/enHome InStyle: https://www.hktdc.com/event/homeinstyle/enFashion InStyle: https://www.hktdc.com/event/fashioninstyle/enHong Kong International Printing & Packaging Fair: https://www.hktdc.com/event/hkprintpackfair/enDeLuxe PrintPack Hong Kong: https://www.hktdc.com/event/deluxeprintpackhk/enHong Kong International Licensing Show and Asian Licensing Conference: https://www.hktdc.com/event/hklicensingshow/enMedia enquiriesFor enquiries, please contact:Home InStyle, Fashion InStyle, HK Gifts & Premium Fair, HK International Printing & Packaging Fair and DeLuxe PrintPack Hong KongPandagon:Fraser LiTel: 6083 5623Email: pandagon.limited@gmail.comHKTDC’s Communications & Public Affairs Department:Clayton LauwTel: 2584 4472Email: clayton.y.lauw@hktdc.org   HK International Licensing Show and Asian Licensing ConferenceRaconteur:  Molisa LauTel: 6187 7786Email: molisalau@raconteur.hkBetsy TseTel: 9742 7338Email: betsytse@raconteur.hkHKTDC’s Communications & Public Affairs Department:Winnie KanTel: 2584 4055Email: winnie.wy.kan@hktdc.orgHKTDC Newsroom: http://mediaroom.hktdc.com/enAbout HKTDCThe Hong Kong Trade Development Council (HKTDC) celebrates its 60th anniversary this year. The HKTDC is a statutory body established in 1966 to promote, assist and develop Hong Kong's trade. With over 50 offices globally, including 13 in the Chinese Mainland, the HKTDC promotes Hong Kong as a two-way global investment and business hub. The HKTDC organises international exhibitions, conferences and business missions to create business opportunities for companies, particularly small and medium-sized enterprises (SMEs), in the mainland and international markets. The HKTDC also provides up-to-date market insights and product information via research reports and digital news channels. For more information, please visit: www.hktdc.com/aboutus.  Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

SINGAPORE, Apr 27, 2026 - (ACN Newswire via SeaPRwire.com) - Travelling overseas often feels exciting until unexpected charges appear on your card statement after returning home. Many travellers from Singapore rely on overseas credit cards for convenience, rewards, and security, but international transactions can sometimes include hidden costs that are easy to overlook. From currency conversion markups to foreign transaction fees, these charges can quietly increase overall travel expenses. Understanding how these charges work can help travellers manage spending better and make more informed payment choices while abroad.Below are practical ways that can help minimise hidden fees when using credit cards overseas while keeping travel spending smooth and predictable.Understand foreign transaction fees before travellingForeign transaction fees are among the commonly overlooked charges linked to overseas spending. Many cards issued in Singapore charge a fee of around 3.25% per foreign currency transaction, which may not seem significant at first glance. However, on a holiday budget of SGD 4,000, this fee alone can add SGD 130 to total expenses without obvious visibility during purchases.Reviewing the fee structure of an overseas card before travelling can help travellers estimate actual costs more accurately. Some cards offer reduced or promotional foreign transaction charges, which can help manage overall travel budgets more effectively. Knowing these details in advance may also help travellers decide when card payments make financial sense compared to alternative payment methods.Consider paying in local currency instead of SGDWhen paying overseas, merchants sometimes offer the option to charge the amount directly in Singapore dollars. This feature, known as Dynamic Currency Conversion (DCC), may appear convenient because it shows the final amount immediately. However, exchange rates used in DCC transactions often include markups, which can exceed standard bank conversion fees.Choosing to pay in the local currency allows the overseas card network to process the exchange instead. Card networks typically apply more competitive rates compared to merchant-set conversions. Over multiple transactions, such as dining, shopping, and transport, this can help reduce unnecessary markups.Check card currency conversion ratesExchange rates used by card issuers fluctuate daily and may differ slightly from rates seen on currency apps or news platforms. While the difference per transaction might appear minor, frequent purchases abroad can still affect total spending. For example, a 1% difference on SGD 2,500 worth of spending can translate into roughly SGD 25 in additional costs.Reviewing how an overseas card calculates exchange rates can provide better transparency. Some banks publish their rate calculation methods, allowing travellers to estimate expected charges more accurately.Avoid overseas ATM withdrawals when possibleWithdrawing cash abroad using a credit card can trigger multiple layers of fees simultaneously. These may include cash advance fees, overseas ATM operator charges, and immediate interest accrual starting from the withdrawal date. In Singapore, cash advance fees commonly range between 6% and 8% of the withdrawn amount, with minimum charges around SGD 15.Using an overseas card mainly for purchases rather than cash withdrawals can help reduce these compounded costs. Carrying a modest amount of exchanged currency from Singapore or using debit-based solutions for cash needs may help travellers avoid high-interest situations linked to credit card withdrawals overseas.Watch for hotel and car rental pre-authorisation chargesHotels and car rental companies frequently place temporary holds on credit cards as security deposits. These pre-authorisation amounts can be significant depending on location and booking type. Although not permanent charges, they temporarily reduce available credit limits and sometimes involve conversion adjustments once released.Understanding how pre-authorisation works can help travellers avoid confusion when reviewing statements. Using an overseas card with sufficient credit limits may reduce the likelihood of declined transactions during travel. Checking release timelines with merchants can also help travellers track when funds become available again after checkout.Choose a Travel Credit Card designed for overseas spendingNot all credit cards function the same way internationally. Some overseas card options available in Singapore include travel-focused features, such as lower foreign currency fees, travel rewards, or complimentary insurance coverage. These features can help offset certain costs associated with overseas spending when used strategically.Comparing card benefits based on travel frequency, spending habits, and destinations can help travellers identify options aligned with their lifestyle. A well-matched overseas card may also offer added value through rewards or travel-related privileges, making international spending more predictable overall.Final thoughtsFor Singapore travellers, using an overseas card thoughtfully, alongside awareness of currency conversion practices and transaction structures, can help make international payments more transparent. With a few informed habits, overseas spending can remain convenient while reducing the likelihood of unexpected costs appearing after the journey ends.Disclaimer: This content is published by iQuanti Singapore Pte. Ltd., an external marketer engaged and compensated by UOB Ltd.Contact Information:Name: Sonakshi MurzeEmail: Sonakshi.murze@iquanti.comJob Title: ManagerSOURCE: iQuanti Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

HONG KONG, Apr 27, 2026 - (ACN Newswire via SeaPRwire.com) - China Chunlai Education Group Co., Ltd. ("China Chunlai" or the "Company", together with its subsidiaries and its consolidated affiliated entities, the "Group", Stock Code: 1969) is pleased to announce the unaudited consolidated interim results of the Group for the six months ended 28 February 2026 (the "Reporting Period").For the Reporting Period, the Group continued to increase the number of students enrolment, and recorded a revenue of RMB956.3 million, representing an increase of 7.4% compared with the same period of last year; gross profit recorded RMB511.6 million, representing an increase of 2.4% compared with the same period of last year; profit recorded RMB429.8 million, representing an increase of 5.7% compared with the same period of last year.During the Reporting Period, the Group recorded tuition fees of RMB874.1 million, representing an increase of 7.4%, boarding fees recorded RMB82.2 million, representing an increase of 6.9%. Besides, the revenue of Group's schools increased: Anyang University recorded a revenue of RMB232.5 million, representing an increase of 12.3% compared with the same period of last year; Jingzhou College recorded a revenue of RMB191.7 million, representing an increase of 12.0% compared with the same period of last year; Jiankang College recorded a revenue of RMB76.1 million, representing an increase of 10.5% compared with the same period of last year; Shangqiu University Kaifeng Campus recorded a revenue of RMB138.0 million, representing an increase of 6.1%;Shangqiu University recorded a revenue of RMB217.7 million, representing an increase of 5.8% compared with the same period of last year.As of 28 February 2026, the number of students enrolled was 116,784, representing an increase of 5.3% compared with the same period of last year. Among which, Jingzhou College had a total enrollment of 21,643, representing an increase of 11.0% compared with the same period of last year; Jiankang College had a total enrollment of 10,808, representing an increase of 10.2% compared with the same period of last year; Anyang University had a total enrollment of 28,897, representing an increase of 9.4% compared with the same period of last year; Shangqiu University Kaifeng Campus had a total enrollment of 16,280, representing an increase of 4.8%;Shangqiu University had a total enrollment of 27,051, representing an increase of 1.8% compared with the same period of last year.The educational philosophies of the Group’s schools and well-developed curricula as well as its high graduate employment rates enable the Group to attract high-quality students who are seeking a pathway to satisfactory employment. For the 2025/2026 school year, the overall yield of five colleges that offer bachelor’s degree programmes (being Shangqiu University, Shangqiu University Kaifeng Campus, Anyang University, Anyang University Yuanyang Campus and Jingzhou College) was 91.55%.The Board of China Chunlai Education Group Co., Ltd. said: “In recent years, private higher education in China has continued to improve, and the number of students in schools has continued to increase. We have seized the opportunity to continuously improve and optimize the curriculum system, build an excellent teacher team, strive to expand the enrollment scale, and promote sustained and steady growth in performance. In the future, we expect to enlarge the capacity of the colleges progressively, continue to increase the total number of enrolled students, and hire teachers with a strong command of their respective subject areas who are open to innovative teaching methods and a caring heart toward students’ well-being, and continuously improve the high-quality curriculum system. With Tianping College becoming a consolidated affiliated entity of the Company, our future performance is expected to maintain steady growth.”About China Chunlai Education Group Co., Ltd.:China Chunlai Education Group Co., Ltd. (1969.HK), is a leading provider of private higher education in China. In September 2018, the Group was listed on the main board of the Hong Kong Stock Exchange. Since the Group was established in 2004, it has grown to operate four colleges in Henan Province and two colleges in Hubei Province, participate in the operation of one college in Jiangsu Province. For the past two decades, the schools under the Group have provided tens of thousands of graduates and talents for construction for the country and socialist society. With a strong passion for education, the Group has seen continuous improvements in educational standards across its curriculum. The Group’s unique educational traits and overall excellence have been widely accredited by authorities and society. Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

BOSTON, Apr 25, 2026 - (ACN Newswire via SeaPRwire.com) - Peer To Peer Network, Inc. (OTC: PTOP), the first publicly traded digital business card company, today announced that its highly anticipated MOBICARD™ 1.8 platform — featuring integrated revenue-generating capabilities — is expected to be released to app stores within the next 30 days.This upcoming release marks a major turning point for the company as MOBICARD™ transitions from a pure networking tool into a monetized digital ecosystem designed to generate recurring revenue across both consumers and businesses.Built for Revenue — Designed for ScaleMOBICARD™ 1.8 introduces multiple revenue streams, including:Subscription Model for ConsumersFree version supported by adsPremium ad-free version at $1.99/monthAnnual premium plan at $20/yearEnterprise-Level Business MonetizationPaid promotional placements within the appTiered business subscriptions enabling companies to advertise directly to usersLead generation tools for enterprise clientsIn-App Engagement MonetizationTrackable card sharing and user engagement analyticsIncreased visibility for businesses through promoted placementsThese features position MOBICARD as more than just a digital card - it becomes a revenue engine driven by user activity, business adoption, and scalable subscription growth.In addition to monetization, MOBICARD 1.8 includes major upgrades designed to increase engagement and sharing:Seamless one-click sharing functionalityAirdrop abilityFully optimized QR code distributionImproved card navigation and discovery featuresEnhanced UI/UX for a cleaner, more professional lookStreamlined “Share This Card” experience to drive viral growthThe platform is being refined to ensure users can easily connect, share, and expand their networks - while businesses gain powerful tools to reach those users“By integrating subscription models and enterprise tools directly into the user experience, we are building a foundation for scalable growth and long-term value creation,” stated Nicholis Santana Team Technology Leader for Peer To Peer Network.PTOP believes that MOBICARD™ 1.8 represents a critical inflection point, as the platform begins to:Convert user activity into recurring revenue streamsProvide scalable monetization opportunities for businessesIncrease overall platform engagement and retentionWith monetization now integrated into the core user experience, Peer To Peer Network is positioning MOBICARD™ to compete at scale within the rapidly growing digital identity and networking market.“This is the version that begins turning MOBICARD™ into a true revenue-generating platform,” said Joshua Sodaitis, Chairman & CEO of Peer To Peer Network. “We’ve focused on building a system where both users and businesses can participate in the ecosystem—driving growth, engagement, and ultimately revenue.”The Company is currently finalizing development and preparing for submission to major app stores, with launch anticipated within the next 30 days.OutlookThe Company is currently finalizing development and preparing for submission to the Apple App Store and Google Play Store. While no assurances can be given, management anticipates launch within the next 30 days.About Peer To Peer Network (OTC: PTOP)Peer To Peer Network, Inc. (OTC PINK: PTOP) is a technology company developing platforms that enhance communication, transparency, and connectivity between individuals and organizations.For more information, visit https://ptopnetwork.com. Contact Information:Peer To Peer Network, Inc.Investor RelationsEmail: info@freemobicard.comPhone: 617-481-1971Website: www.ptopnetwork.com Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

George Town, Cayman Islands, Apr 24, 2026 - (ACN Newswire via SeaPRwire.com) -�EQIBank today announced the expansion of its global Banking-as-a-Service (BaaS) platform, strengthening its infrastructure and onboarding capabilities to enable organisations to launch licensed banking services globally in as little as 10 weeks.��EQIBank's BaaS platform allows organisations to offer regulated banking services under their own brand without building or licensing a bank. It supports service delivery across more than 180 countries and over 100 currencies through a single banking infrastructure.Available services include multi-currency accounts, international payments, cards, lending, custody, escrow services, foreign exchange and OTC trading. Digital asset capabilities are fully integrated into the platform, enabling fast crypto-to-fiat and fiat-to-crypto conversions supported by deep liquidity and institutional-grade trading infrastructure.EQIBank provides the banking licence, compliance framework and infrastructure, while partners remain in control of their brand and client relationships.Built on a regulated banking foundation, EQIBank combines global reach with a strong compliance and risk framework. The platform includes integrated anti-money laundering, know-your-customer and transaction monitoring systems, supported by a strong regulatory track record. Its compliance framework is specifically designed to support complex cross-border and digital asset activity at scale, alongside established relationships with global correspondent banking partners."Most organisations don't want to become banks, but they do want to offer banking services as part of their business," said Jason Blick, Chairman of EQIBank. "The challenge has always been regulatory complexity and infrastructure. We remove both barriers. Our platform allows partners to launch quickly, operate globally from day one and deliver services across fiat and digital assets within a fully regulated environment."EQIBank's BaaS platform is designed for organisations with international client bases, including digital asset firms, financial institutions, family offices and other globally focused businesses.Since launching its BaaS offering, EQIBank has onboarded new partners each month, with some partners scaling to over 100,000 users within their first year.About EQIBankEQIBank is a global digital bank providing accounts, payments, cards, custody, lending and investment services to businesses, institutions and high-net-worth clients across more than 180 countries. Through its Banking-as-a-Service platform, EQIBank enables organisations to offer licensed banking services under their own brand using regulated infrastructure and global technology systems.Media enquiriesBrand: EQIBankContact: Media teamWebsite: https://baas.eqibank.com/ Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

NEW YORK, Apr 24, 2026 - (ACN Newswire via SeaPRwire.com) - FastX today announces the official launch of its platform, a next-generation exchange built for professional and active traders who require institutional‑grade tools without surrendering custody or control of their assets. FastX goes live globally on 5 May, with traders able to access the platform directly at fastx.co.FastX combines deep on‑chain liquidity, multi‑asset perpetual futures markets, and an advanced copy-trading engine designed to bridge the gap between traditional finance and the decentralized digital asset ecosystem. By leveraging blockchain technology, the platform delivers low‑latency mirroring of trades across major decentralized networks worldwide—while keeping users in full control of their own wallets and risk."FastX was created by traders for traders," said Adelene, Chief Executive Officer of FastX. "We've spent our careers on Wall Street desks and in crypto markets, and we've seen the same problems repeat: opaque execution, misaligned incentives, and copytrading systems that ask users to blindly outsource decisions. FastX is our answer—a decentralised, transparent infrastructure layer where traders keep custody, and technology works to augment, not replace, their edge."Backed by a team of veteran traders with more than 50 years of combined experience across top Wall Street institutions and leading crypto trading firms, FastX is built from the ground up as a decentralised protocol. Users connect their own wallets, maintain self‑custody at all times, and interact with smart contracts that execute trades on‑chain, rather than relying on a centralised broker or custodial exchange.At launch, FastX will offer:Deep, on‑chain liquidity across a wide range of perpetual markets, designed to support serious position sizes with tight spreads and minimal slippage.A fast, intuitive trading interface accessible directly via fastx.co, allowing traders to plug in with their preferred wallet and start trading in minutes.A transparent affiliate and points system that shares a meaningful portion of platform fees with the community and rewards traders and partners who help grow liquidity and volume.The flagship feature of FastX is its next‑generation copytrading system. Unlike traditional social trading products that mirror orders on a single venue with unpredictable delays, FastX's engine is designed to route and synchronise copy trades across major decentralised exchanges, layering those capabilities on top of FastX's own liquidity.The result is a copytrading experience that aims to:Minimise latency between lead and follower execution.Mitigate structural risks such as slippage, desync, and obvious forms of manipulation.Exploit decentralised advantages, such as transparent on‑chain track records and programmable risk controls, without turning the platform into a centralised black box."Copytrading has always been typecast as a blind, autonomous disaster waiting to happen," Adelene added. "FastX takes the opposite stance. We use technology to bring more transparency, not less—on‑chain track records, built‑in risk parameters, and infrastructure that reduces front‑running and execution games wherever possible. Over time, our goal is to layer AI‑driven intelligence on top of this foundation so that users can benefit from advanced analytics and risk management, rather than just 'follow and hope'."FastX is currently seed‑funded by a network of angels deeply embedded in the global crypto trading ecosystem. These backers share a common view that the next generation of markets will be built on open, verifiable rails and that traders deserve better, more transparent instrumentation for expressing and managing risk. FastX is assembling a strong advisory board of experienced traders, market makers, and technologists to guide the exchange through its next phase of growth.As a decentralised protocol, FastX does not take custody of user funds and does not operate as a traditional broker. All positions, liquidations, and fee flows are visible on‑chain, giving traders clear, verifiable insight into how the system behaves under all market conditions."Our vision is simple," said Adelene. "We want professional‑grade perpetuals and intelligent copytrading to live where they belong: on transparent, decentralised infrastructure, not in a black box. Launching FastX on 5 May is the first step. From here, we'll continue to ship faster execution, smarter tooling, and AI‑enhanced copytrading that helps traders survive and thrive in 24/7 markets."Traders can learn more and access the exchange at https://fastx.co.About FastXFastX focuses on building decentralised financial infrastructure and tools for professional traders and sophisticated market participants. The company backs products that prioritise self‑custody, transparency, and robust risk management in rapidly evolving digital asset markets.Media ContactBrand: FastX Perpetuals ExchangeContact: Ella HuangWebsite: https://fastx.co/ Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

SHENZHEN, Apr 23, 2026 - (ACN Newswire via SeaPRwire.com) - China Medical System Holdings Limited (the “Group” or “CMS”) is pleased to announce that the New Drug Application (NDA) in China for the Seasonal Allergic Rhinitis (SAR) indication of MG-K10 (generic name: Comekibart Injection, “MG-K10” or the “Product”), a Class 1 innovative drug anti-IL-4Rα humanized monoclonal antibody injection, for which the Group holds co-development rights (excluding the indication of atopic dermatitis (AD)) and exclusive commercialization rights, was accepted by the National Medical Products Administration of China (NMPA) on 23 April 2026. The Product is proposed for the treatment of adult patients with moderate-to-severe seasonal allergic rhinitis whose symptoms remain inadequately controlled after treatment with intranasal corticosteroids.The acceptance of the NDA represents an important milestone for the Group’s ophthalmology business, CMS Vision, as it expands its therapeutic focus from ophthalmology into the field of otolaryngology (ENT). It also marks another significant milestone in the Group’s research and development progress in the field of type 2 inflammatory diseases. If the Product is successfully approved for marketing, the Group will leverage its strong academic promotion capabilities and extensive commercialization network to accelerate the commercialization of the Product. It is also expected to further enhance the academic brand influence of CMS Vision in the relevant specialty areas and provide new momentum for the Group’s business growth.BIC Potential: Dosing once every 4 weeks; Phase III study met the primary endpoint with a favorable safety profileMG-K10 is an innovative long-acting anti-IL-4Rα humanized monoclonal antibody that simultaneously blocks the signaling pathways of the key type 2 inflammatory cytokines IL-4 and IL-13, thereby exerting immunomodulatory effects. It is being developed for the treatment of type 2 inflammatory diseases, including seasonal allergic rhinitis, asthma, atopic dermatitis (AD), prurigo nodularis, chronic obstructive pulmonary disease (COPD), chronic spontaneous urticaria (CSU), chronic rhinosinusitis with nasal polyps, and eosinophilic esophagitis. Currently marketed anti-IL-4Rα therapies require administration once every two weeks. MG-K10, with its longer half-life, enabling a once-every-four-weeks dosing regimen. It therefore has the potential to become the first long-acting anti-IL-4Rα monoclonal antibody to be marketed globally, with the potential to be best-in-class. MG-K10 has met the primary endpoint in a multicenter, randomized, double-blind, placebo-controlled Phase III clinical trial in adult patients with moderate-to-severe seasonal allergic rhinitis. The results of the Phase III study demonstrated that the primary endpoint achieved statistical significance, with significantly superior efficacy compared with the placebo group, and a favorable safety profile.Focusing on Unmet Needs: ~250 million patients; 62% of moderate-to-severe patients remain inadequately controlled; long-acting breakthrough brings new treatment opportunitiesAllergic rhinitis is a chronic inflammatory disease of the nasal mucosa mediated by IgE, with type 2 inflammation as the core pathogenic mechanism. It occurs in susceptible individuals upon exposure to environmental allergens such as pollen and dust mites. In recent years, the prevalence of the disease in China has increased from 11.1% to 17.6%, affecting approximately 250 million people[1], among whom 52.2% are patients with persistent moderate-to-severe disease[2]. The disease burden is significant and has become an important public health issue. Current standard treatments, including intranasal corticosteroids and antihistamines, have notable limitations. 62% of patients with moderate-to-severe disease remain inadequately controlled[3]. Long-term use of intranasal corticosteroids may lead to adverse reactions such as epistaxis[4], while antihistamines are often associated with side effects such as drowsiness[5], indicating significant unmet clinical needs. As a biologic therapy targeting IL-4Rα, MG-K10 can block the type 2 inflammatory pathway at its source. Compared with currently approved biologics targeting the same pathway (which require dosing once every two weeks), MG-K10 achieves a differentiated breakthrough in dosing frequency with its long-acting property allowing administration once every four weeks, thereby significantly extending dosing intervals. This may help improve patient treatment adherence and reduce the time and economic burden associated with frequent hospital visits. The Product has the potential to provide a new treatment option for patients with moderate-to-severe disease who respond poorly to conventional therapies, thereby reducing the individual and socio-economic burden associated with the disease.On 24 January 2025, the Group through subsidiaries of the Company entered into a Collaboration Agreement (“Agreement”) with Hunan Mabgeek Biotech Co., LTD and its subsidiary for MG-K10. In accordance with the Agreement and supplementary agreements, the Group has obtained the co-development rights (excluding AD) and exclusive commercialization rights for the Product in Mainland China, Hong Kong Special Administrative Region, Macao Special Administrative Region, Taiwan Region and Singapore; its subsidiary Dermavon Holdings Limited has obtained, through its subsidiary, the co-development rights (excluding AD) and exclusive commercialization rights for the Product in the field of dermatological indications in Mainland China.About CMSCMS is a platform company linking pharmaceutical innovation and commercialization with strong product lifecycle management capability, dedicated to providing competitive products and services to meet unmet medical needs.CMS focuses on the global first-in-class (FIC) and best-in-class (BIC) innovative products, and efficiently promotes the clinical research, development and commercialization of innovative products, enabling the continuous transformation of scientific research into clinical practices to benefit patients.CMS deeply engages in several specialty therapeutic fields, and has developed proven commercialization capabilities, extensive networks and expert resources, resulting in leading academic and market positions for its major marketed products. CMS continues to promote the in-depth development in its advantageous specialty fields, strengthening the competitiveness of the Cardiovascular-Kidney-Metabolic/ gastroenterology/ ophthalmology/ skin health businesses, bringing economies of scale in specialty fields. Among them, the skin health business (Dermavon) has become a leading enterprise in its field, and is proposed to be listed independently on the SEHK. Meanwhile, CMS continuously promotes the operation and development of its integrated R&D, manufacturing and commercialization chain in Southeast Asia and the Middle East, capturing growth opportunities in emerging markets to support the high-quality and sustainable development of the Group.Reference1. Cheng L, Chen J, Fu Q, et al. Chinese Society of Allergy Guidelines for Diagnosis and Treatment of Allergic Rhinitis. Allergy Asthma Immunol Res. 2018;10:300‑353.2. Zheng, Ming et al. “Clinical characteristics of allergic rhinitis patients in 13 metropolitan cities of China.” Allergy vol. 76,2 (2021): 577-581. doi:10.1111/all.145613. White, P et al. “Symptom control in patients with hay fever in UK general practice: how well are we doing and is there a need for allergen immunotherapy?” Clinical and experimental allergy : journal of the British Society for Allergy and Clinical Immunology vol. 28,3 (1998): 266-70. doi:10.1046/j.1365-2222.1998.00237.x4. Rosenblut, A et al. “Long-term safety of fluticasone furoate nasal spray in adults and adolescents with perennial allergic rhinitis.” Allergy vol. 62,9 (2007): 1071-7. doi:10.1111/j.1398-9995.2007.01521.x5. Bernstein, Jonathan A et al. “Allergic Rhinitis: A Review.” JAMA vol. 331,10 (2024): 866-877. doi:10.1001/jama.2024.0530CMS Disclaimer and Forward-Looking StatementsThis press release is not intended to promote any products to you and is not for advertising purposes. This press release does not recommend any drugs, medical devices and/or indications. If you want to know more about the diagnosis and treatment of specific diseases, please follow the opinions or guidance of your doctor or other medical and health professionals. Any treatment-related decisions made by healthcare professionals should be based on the patient’s specific circumstances and in accordance with the drug package insert.This press release which has been prepared by CMS does not constitute any offer or invitation to purchase or subscribe for any securities, and shall not form the basis for or be relied on in connection with any contract or binding commitment whatsoever. This press release has been prepared by CMS based on information and data which it considers reliable, but CMS makes no representation or warranty, express or implied, whatsoever, and no reliance shall be placed on, the truth, accuracy, completeness, fairness and reasonableness of the contents of this press release. Certain matters discussed in this press release may contain statements regarding the Group’s market opportunity and business prospects that are individually and collectively forward-looking statements. Such forward-looking statements are not guarantees of future performance and are subject to known and unknown risks, uncertainties and assumptions that are difficult to predict. Any forward-looking statements and projections made by third parties included in this press release are not adopted by the Group and the Company is not responsible for such third-party statements and projections.Media ContactBrand: China Medical System Holdings Ltd.Contact: CMS Investor RelationsEmail: ir@cms.net.cnWebsite: https://web.cms.net.cn/en/home/ Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

HONG KONG, Apr 23, 2026 - (ACN Newswire via SeaPRwire.com) - The 3rd Smart Lighting Expo and the 17th Hong Kong International Lighting Fair (Spring Edition), organised by the Hong Kong Trade Development Council (HKTDC), successfully concluded today at the Hong Kong Convention and Exhibition Centre. The four-day fairs brought together some 900 exhibitors and attracted some 13,000 buyers from 114 countries and regions for on-site visits and sourcing. Buyer numbers recorded growth, including those from Asian markets such as Malaysia and the Philippines; European markets including France, Germany, the Netherlands, Russia and Türkiye; and North and South American markets, including Brazil, Canada and the US, highlighting Hong Kong’s role as a key global hub for lighting products and technology exchange.Jenny Koo, Deputy Executive Director of the HKTDC, said: "This year’s two lighting fairs attracted industry-leading enterprises who showcased cutting-edge high-performance, smart lighting and sustainable products and solutions. The events also attracted quality buyers from global markets. This helps companies diversify supply chains, explore new markets, and underscores Hong Kong’s strength as an ‘International Exhibition Capital’ which boosts efficient business platforms. The fairs are the preferred platform for the industry to showcase innovation, connect with global buyer networks and accelerate business development.”Survey findings: Respondents were most optimistic about the India and Australia marketsTo keep abreast of the latest industry developments, the HKTDC conducted an on-site survey during the fairs, interviewing 450 exhibitors and buyers. The findings show that overall confidence among exhibitors and buyers in future business development has shown a general increase.Key market outlook and product trend findings:49.1% of respondents expect overall sales to increase in the next 12 to 24 months, while 47.6% expect sales to remain stable.Respondents consider India (73.4%), Australia (71%), ASEAN countries (70.4%), and Japan (68.1%) to be promising or very promising target sales markets for lighting products over the next two years in terms of growth.In terms of new market development, exhibitor respondents are actively exploring Middle East (31.8%), Europe (29.5%), ASEAN countries (23.9%), Latin America (17.6%) and North America (14.8%).In the smart lighting segment, respondents identified home automation and intelligent lighting control systems (48.2%), energy saving lighting control solutions (38.2%), and outdoor smart security lighting systems (31.1%) as having the greatest growth potential over the next two years.Compared with conventional lighting products, respondents indicated that consumers are willing to pay an average premium of 29% for lighting products equipped with smart functions.Scenario-based displays and new zones enhance sourcing effectiveness, with positive trade outcomesThe newly launched “Light Lab” features various scenario-based and immersive designs, integrating lighting products into landscape, sports, cultural and artistic application settings. Shanghai Sansi Electronic Engineering showcased plant clamp lights and compact downlights suitable for museum applications. Guoli Zhu, Deputy Chief Engineer of the company said: “The Light Lab has effectively enhanced the presentation of our products, enabling buyers to more intuitively and swiftly grasp product features and their real-world application scenarios. This has successfully attracted buyers from Argentina, Canada, Germany, India, Japan and the US to visit our booth for in-depth discussions. We expect this to result in orders worth over US$1 million.”The Smart Lighting Expo also debuted the “Smart Display and Stage Lighting & Sound Zone” which displayed a wide range of intelligent display solutions. Industry leader Absen participated in the fair for the first time. Benjamin Tang, Senior Sales Engineer, said: “The new zone has effectively enhanced product visibility, attracting buyers from Eastern Europe, Oceania, North America, South America, and South Asia to our booth. These inquiries came from new clients across key sectors such as cultural tourism and stage engineering. We have also successfully engaged in several promising collaboration discussions with potential clients from the Dominican Republic, Hong Kong and Thailand, further strengthening the company’s market expansion plan. We estimate the value of orders from the expo will amount to US$930,000. Riding on this momentum, we have decided to join the Hong Kong International Lighting Fair (Autumn Edition) this year.”The newly launched “Leisure Lighting Zone” has injected new momentum into the Spring Lighting Fair. Rebecca Seo, CFO of NIZ, a first-time exhibitor from Korea, said: “The fair has provided us with an excellent platform to connect with international buyers. We have successfully connected with buyers from Denmark, Germany, Japan, and the US, and a well-known Japanese homeware retailer has already placed an on-site order. Thanks to the strong traffic generated by the new zone, we expect the fair to bring up to US$70 million in orders for our company this year."Supported by Zhongshan as the Special Partner City, the fairs featured the Zhongshan Guzhen Pavilion and Zhongshan Henglan Pavilion under the Zhongshan Smart Home Zone, presenting the manufacturing strength and competitiveness of the region’s lighting industry while supporting enterprises in “going global”. Merry Liu, Manager of Bairan Lighting, an industrial enterprise above designated size in Henglan, Zhongshan, said: “The two lighting fairs provide Zhongshan enterprises with an efficient ‘go-global’ gateway, enabling us to connect directly with buyers from Europe, the Middle East, South America, and Southeast Asia. This helps drive our products and brand onto the international stage. We expect to achieve US$2 million in sales.”During the fair, the HKTDC organised a buying mission to Zhongshan for the first time, visiting several lighting factories and participating in business matching meetings. This initiative aimed to deepen exchange and cooperation within the Zhongshan lighting supply chain. The visit successfully facilitated several substantive business collaborations; New Zealand buyer Spark100 Ltd established a connection with a Zhongshan lighting supplier, with a potential order value estimated between US$100,000 and US$300,000.This year’s exhibition also attracted buyers from the Middle East. Patrick Zhang, VP of sales of Tecnon Lighting Technology from the Shenzhen Pavilion, stated: “At this year’s fair, a buyer from the United Arab Emirates and a US buyer from a leading women’s fashion brand are likely to become our cooperation partners. We expect to generate US$2 million in sales turnover for our company.”As construction projects in the ASEAN region accelerate, market demand for smart lighting solutions continues to expand. Sambath HK, Manager of RS Decoration from Cambodia, stated, “I travelled here specifically to source lighting products for 14 new commercial building and luxury residential projects. I have already met with over 20 new suppliers and identified two potential partners offering smart street lights, solar lights, and decorative lighting products. I will initially purchase US$100,000 worth of smart street lights.”Driven by the Belt and Road Initiative, urban development in participating countries and regions are in full swing, fuelling a continuous surge in demand for high-efficiency and smart lighting products. Aigerim Beisekina, Supply Manager of Karelz.kz from Kazakhstan, said: “This is our first time visiting the twin lighting fairs, to find reliable suppliers for a solar-powered stadium and sports lighting for three international schools currently under construction in Kazakhstan. Through the Click2Match business matching platform, we have identified three potential suppliers from the Chinese Mainland and plan to purchase lighting equipment valued between US$600,000 and US$900,000.”During the fairs, multiple professional events were held, including the Asian Lighting Conference and the Smart Lighting Solutions Forum. Designers and industry representatives from different regions shared market trends, application cases and technological developments, providing forward-looking market insight for the industry.EXHIBITION+ model sustains post-fair business opportunitiesUnder the hybrid EXHIBITION+ model, the twin lighting fairs combined in-person sourcing with online meetings via the HKTDC’s Click2Match smart business-matching platform and hktdc.com sourcing platform. Click2Match will be available until 30 April to facilitate discussions between exhibitors and buyers around the world.Photo download:  https://bit.ly/42m6sqDThe 3rd Smart Lighting Expo and the 17th Hong Kong International Lighting Fair (Spring Edition), organised by the Hong Kong Trade Development Council (HKTDC), successfully concluded today at the Hong Kong Convention and Exhibition Centre, attracted some 13,000 buyers from 114 countries and regions for on-site visits and sourcing.The newly launched “Light Lab” adopted a series of scenario-based and immersive designs, integrating lighting products directly into landscape, sports, cultural and artistic application settings, enabling buyers to better understand product features and practical applications.At the Spring Lighting Fair, the featured “Hall of Aurora” brought together 120 international and premium lighting brands, attracting numerous global buyers.The Shanghai Pudong Intelligent Lighting Association also returned to the Smart Lighting Expo for the third consecutive year, presenting the “Intelligent Ecosystem & IoT Supply Chain Zone”.As for the Spring Lighting Fair, exhibitors include the Xiamen Pavilion, and newly participating Changzhou Zouqu District Pavilion and Zhejiang Pavilion, further broadening industry exchange.The two fairs gathered numerous renowned brands and industry leaders, including Absen (photo), an LED display provider featured at the NBA All-Stars Games, the FIFA Qatar World Cup and Qatar Doha World Expo, and a Guinness World Record holder; and Shanghai Sansi, which supplies over 60% of the display screens in Times Square, New York.During the fairs, the HKTDC arranged various matching activities to connect buyers and exhibitors. The photo shows buyer Powermep from the UAE in discussion with an exhibitor.During the fairs, the HKTDC organised a buying mission to Zhongshan for the first time, visiting several lighting factories and participating in business matching meetings, strengthening exchange and cooperation within the Zhongshan lighting supply chain.‍The Smart Lighting Solution Forum was held on 21 April. Industry experts shared developments in smart home lighting systems and human-centric lighting for home entertainment as well as discussion of the eco-system of health and connected lighting supply chains.As part of the city’s mega-event economy, the Hong Kong Tourism Board (official exhibition promotion partner) arranged special “Cheung Po Tsai” Victoria Harbour night cruises during the fairs to enhance the business travel experience of convention and exhibition visitors.WebsitesHong Kong International Lighting Fair (Spring Edition): hklightingfairse.hktdc.com/tcSmart Lighting Expo: smartlightingexpo.hktdc.com/tcHKTDC Mediaroom: http://mediaroom.hktdc.com/enMedia enquiriesHKTDC’s Communications & Public Affairs Department:Stanley So Tel: (852) 2584 4049 Email: stanley.hp.so@hktdc.orgNavin Law Tel: (852) 2584 4525  Email: navin.cm.law@hktdc.orgSerena Cheung Tel: (852) 2584 4272 Email: serena.hm.cheung@hktdc.orgAbout HKTDCThe Hong Kong Trade Development Council (HKTDC) celebrates its 60th anniversary this year. The HKTDC is a statutory body established in 1966 to promote, assist and develop Hong Kong's trade. With over 50 offices globally, including 13 in the Chinese Mainland, the HKTDC promotes Hong Kong as a two-way global investment and business hub. The HKTDC organises international exhibitions, conferences and business missions to create business opportunities for companies, particularly small and medium-sized enterprises (SMEs), in the mainland and international markets. The HKTDC also provides up-to-date market insights and product information via research reports and digital news channels. For more information, please visit: www.hktdc.com/aboutus. Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

SPRINGVILLE, UT, Apr 23, 2026 - (ACN Newswire via SeaPRwire.com) - Sisel International�today announced that it has appointed Pamela Ferry as General Manager of Australia and New Zealand as the company accelerates its expansion and transitions to full market operations across the region.Ferry brings more than 20 years of experience in the global direct selling industry, with a focus on international market expansion, distributor growth, and leadership development, including experience supporting the relaunch of underperforming markets and driving renewed growth. Throughout her career, she has held leadership roles focused on building strong teams, developing field leaders, and fostering long-term organizational success. An experienced presenter, trainer, and events professional, Ferry is recognized for her ability to connect with audiences and translate strategy into practical field execution. Her strengths in relationship building and education position her to play a key role in developing Sisel's distributor network and establishing a strong foundation in the region.The appointment comes at a pivotal stage as Sisel expands into the Australian market, with a focus on building infrastructure, enabling�distributor growth, and introducing its science-driven wellness solutions to new audiences. Ferry will lead efforts to develop market operations, strengthen field support, and drive sustainable growth across Australia and New Zealand."Australia represents an important opportunity for Sisel as we continue our international expansion," said Tom Mower Jr., CEO and Co-Founder of Sisel International. "Pamela brings not only deep industry experience, but a proven ability to develop leaders and build strong distributor networks. Her leadership will be instrumental as we establish a long-term presence in the region."About Sisel International Sisel International is a global health and wellness company dedicated to developing high-quality, science-driven products designed to support healthier living. Co-founded by Tom Mower Sr. and led by CEO Tom Mower Jr., Sisel creates supplements, personal care, home care, and wellness solutions formulated without harmful or unnecessary ingredients. Guided by its founding principles, the company is committed to innovation, safety, and quality while empowering individuals to pursue health, longevity, and personal success worldwide.Media Contact:Sisel InternationalMarketing TeamEmail:�marketing@sisel.netWebsite: www.sisel.netSOURCE: Sisel International Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

NEW YORK, Apr 23, 2026 - (ACN Newswire via SeaPRwire.com) - FastX today announces the official launch of its platform, a next-generation exchange built for professional and active traders who require institutional‑grade tools without surrendering custody or control of their assets. FastX goes live globally on 5 May, with traders able to access the platform directly at fastx.co.FastX combines deep on‑chain liquidity, multi‑asset perpetual futures markets, and an advanced copy-trading engine designed to bridge the gap between traditional finance and the decentralized digital asset ecosystem. By leveraging blockchain technology, the platform delivers low‑latency mirroring of trades across major decentralized networks worldwide—while keeping users in full control of their own wallets and risk."FastX was created by traders for traders," said Adelene, Chief Executive Officer of FastX. "We've spent our careers on Wall Street desks and in crypto markets, and we've seen the same problems repeat: opaque execution, misaligned incentives, and copytrading systems that ask users to blindly outsource decisions. FastX is our answer—a decentralised, transparent infrastructure layer where traders keep custody, and technology works to augment, not replace, their edge."Backed by a team of veteran traders with more than 50 years of combined experience across top Wall Street institutions and leading crypto trading firms, FastX is built from the ground up as a decentralised protocol. Users connect their own wallets, maintain self‑custody at all times, and interact with smart contracts that execute trades on‑chain, rather than relying on a centralised broker or custodial exchange.At launch, FastX will offer:Deep, on‑chain liquidity across a wide range of perpetual markets, designed to support serious position sizes with tight spreads and minimal slippage.A fast, intuitive trading interface accessible directly via fastx.co, allowing traders to plug in with their preferred wallet and start trading in minutes.A transparent affiliate and points system that shares a meaningful portion of platform fees with the community and rewards traders and partners who help grow liquidity and volume.The flagship feature of FastX is its next‑generation copytrading system. Unlike traditional social trading products that mirror orders on a single venue with unpredictable delays, FastX's engine is designed to route and synchronise copy trades across major decentralised exchanges, layering those capabilities on top of FastX's own liquidity.The result is a copytrading experience that aims to:Minimise latency between lead and follower execution.Mitigate structural risks such as slippage, desync, and obvious forms of manipulation.Exploit decentralised advantages, such as transparent on‑chain track records and programmable risk controls, without turning the platform into a centralised black box."Copytrading has always been typecast as a blind, autonomous disaster waiting to happen," Adelene added. "FastX takes the opposite stance. We use technology to bring more transparency, not less—on‑chain track records, built‑in risk parameters, and infrastructure that reduces front‑running and execution games wherever possible. Over time, our goal is to layer AI‑driven intelligence on top of this foundation so that users can benefit from advanced analytics and risk management, rather than just 'follow and hope'."FastX is currently seed‑funded by a network of angels deeply embedded in the global crypto trading ecosystem. These backers share a common view that the next generation of markets will be built on open, verifiable rails and that traders deserve better, more transparent instrumentation for expressing and managing risk. FastX is assembling a strong advisory board of experienced traders, market makers, and technologists to guide the exchange through its next phase of growth.As a decentralised protocol, FastX does not take custody of user funds and does not operate as a traditional broker. All positions, liquidations, and fee flows are visible on‑chain, giving traders clear, verifiable insight into how the system behaves under all market conditions."Our vision is simple," said Adelene. "We want professional‑grade perpetuals and intelligent copytrading to live where they belong: on transparent, decentralised infrastructure, not in a black box. Launching FastX on 5 May is the first step. From here, we'll continue to ship faster execution, smarter tooling, and AI‑enhanced copytrading that helps traders survive and thrive in 24/7 markets."Traders can learn more and access the exchange at https://fastx.co.About FastXFastX focuses on building decentralised financial infrastructure and tools for professional traders and sophisticated market participants. The company backs products that prioritise self‑custody, transparency, and robust risk management in rapidly evolving digital asset markets.Media ContactBrand: FastX Perpetuals ExchangeContact: Ella HuangWebsite: https://fastx.co/ Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

Zurich, Apr 23, 2026 - (ACN Newswire via SeaPRwire.com) - Akkodis, a global leader in digital engineering consulting and part of the Adecco Group has been named a "Leader" by Information Services Group (ISG) in the ISG Provider Lens™ Digital Engineering Services 2026 reports, recognizing the company's strength across critical engineering and technology domains in Europe and the United States.Image: Akkodis named leader in ISG Digital Engineering Services 2026. Source: AkkodisAkkodis earned Leader status in the following quadrants:Augmented Design and R&D Services (Europe)Intelligent Operations and Connected Experiences (Europe)Integrated Platform and Application Services (Europe and U.S.)Leadership in augmented design & R&D servicesISG highlights Akkodis' expertise in end‑to‑end product development, including systems architecture, Model-based Systems Engineering (MBSE) integration, unified tool chains and multi‑domain engineering. The company's digital twin methodologies support deep physical-digital integration for safety‑critical products. By integrating engineering and digital toolchains, Akkodis accelerates agile product development from concept to lifecycle management across automotive, aerospace, rail and industrial sectors.ISG also recognizes Akkodis' leadership in software-defined vehicle (SDV) engineering, with capabilities spanning hardware-in-the-loop (HIL) automation, telemetry pipelines, cloud‑scale validation and AI‑supported analytics. This has been successfully showcased through the Akkodis SDV Academy where clients accelerate advanced driver‑assistance systems (ADAS) and SDV verification while addressing engineering talent gaps. Expertise in embedded systems, sensor fusion and real‑time software reinforces Akkodis' position across mobility, industrial and defense applications.Advancing intelligent operations & connected experiencesISG recognizes Akkodis for advancing industrial intelligence and transforming factory and mission-critical operations. Through smart commissioning frameworks, digital twins and advanced simulation tools, the company helps clients accelerate digital factory planning, reduce layout risks and improve overall equipment effectiveness (OEE). Akkodis also supports predictive quality and maintenance through acoustic sensing, physics-based AI and data-driven diagnostics. Its operations capabilities (including ruggedized hardware engineering, over-the-air (OTA) lifecycle management and industrial asset health solutions), have been applied across industries and asset-intensive environments requiring reliability, safety compliance, environmental resilience and long-term continuity.Strength in Integrated Platform & Application ServicesAkkodis' digital solutions advance AI‑led autonomous engineering by accelerating validation, enhancing quality and enabling compliance‑by‑design at scale. In Europe, ISG highlights Akkodis' Unified AI Platform, powered by AI-Core, alongside its deep expertise in cloud, hybrid and sovereign architectures, including AWS, Azure and sovereign deployments, which helps organizations balance agility with security, compliance and data residency requirements.In the U.S., ISG cites Akkodis' leadership in cloud‑native, MACH‑aligned modernization. Its AI‑enabled development frameworks embed intelligence into workflows, accelerating modernization and enabling personalized digital experiences. DevSecOps, compliance‑by‑design models and a secure, modular AI‑Core platform, enable Akkodis to provide scalable, cloud‑native innovation and flexible integration across modern enterprise and platform ecosystems."We are proud to receive this recognition from ISG which underscores the depth of Akkodis' global digital engineering expertise and our ability to combine AI‑driven engineering, cloud‑agnostic platforms and compliance‑by‑design at global scale to help clients innovate with Akkodis Intelligence across dynamic and complex environments," said Jo Debecker, President & CEO of Akkodis.Shirish Madhukar Kulkarni, Lead Analyst, ISG, said, "Akkodis uniquely combines deep engineering expertise with AI‑led digital twins and scalable platforms to enable faster product innovation, resilient operations, and connected, data‑driven experiences." Srinivasan P N, Senior Lead Analyst, ISG added, "Akkodis' leadership is rooted in four decades of European engineering excellence, where systems engineering, validation depth and software defined innovation converge through Akkodis Intelligence to deliver trusted, AI enabled digital engineering at scale."Media contactsAnne FriedrichSVP, Global Head of Communications, AkkodisM. +4915174633470E. anne.friedrich@adeccogroup.comLisa BushkaVP, External Communications, AkkodisM. +18604630770E. lisa.bushka@adeccogroup.comAbout AkkodisAkkodis is a global digital engineering consulting company that enables organizations to innovate and accelerate by applying technology to redefine how processes and products are developed, powered and optimized. With deep expertise across AI, data, cloud, edge and software engineering, we offer best-in-class technology consultancy. Through our strong, scalable delivery models and specialized talent, we provide end-to-end solutions, from strategy and consulting through implementation. Our commitment to Akkodis Intelligence helps businesses connect the exponential power of technology with the irreplaceable strengths of human thinking and collaboration. Part of the Adecco Group and headquartered in Switzerland, Akkodis brings together 40,000 engineers and digital experts in over 30 countries, with services that span Consulting, Solutions and Academy. With deep experience across the world's major industries, Akkodis empowers businesses to solve complex challenges and achieve sustainable impact.  akkodis.com | LinkedIn | Instagram | Facebook | XAbout the Adecco GroupThe Adecco Group is the world's leading talent company. Our purpose is making the future work for everyone. Through our three global business units - Adecco, Akkodis and LHH - across 60 countries, we enable sustainable and lifelong employability for individuals, deliver digital and engineering solutions to power transformation and empower organisations to optimise their workforces. The Adecco Group leads by example and is committed to an inclusive culture, fostering sustainable employability, and supporting resilient economies and communities. The Adecco Group AG is headquartered in Zurich, Switzerland (ISIN: CH0012138605) and listed on the SIX Swiss Exchange (ADEN). www.adeccogroup.comAbout ISGISG (Information Services Group) is a leading global technology research and advisory firm. A trusted business partner to more than 900 clients, including more than 75 of the world's top 100 enterprises, ISG is committed to helping corporations, public sector organizations, and service and technology providers achieve operational excellence and faster growth. The firm specializes in digital transformation services, including automation, cloud and data analytics; sourcing advisory; managed governance and risk services; network carrier services; strategy and operations design; change management; market intelligence and technology research and analysis. Founded in 2006, and based in Stamford, Conn., ISG employs more than 1,600 digital-ready professionals operating in more than 20 countries-a global team known for its innovative thinking, market influence, deep industry and technology expertise, and world-class research and analytical capabilities based on the industry's most comprehensive marketplace data. For more information, visit www.isg-one.com.SOURCE: Akkodis Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

SINGAPORE, Apr 23, 2026 - (ACN Newswire via SeaPRwire.com) - Sinch Mailgun, part of Sinch, has released its Email Impact Report 2026, introducing new industry benchmarks across 10 high-volume sending sectors and revealing a gap between email performance and execution.Based on insights from more than 400 billion emails sent in 2025 and a global survey of over 1,200 email senders, the report shows that while email remains a critical, high-performing channel, poor deliverability is leaving significant revenue on the table. Nearly 18% of emails fail to reach the inbox, putting up to a fifth of potential return on investment at risk for many organisations.78% of respondents say email is critical to business success. At the same time, the research highlights a growing disconnect between performance and execution, driven by gaps in measurement, deliverability practices and AI application.“APAC businesses rely heavily on email to drive sales, loyalty and customer experience but many are not set up to capture its full value,” said Ginger Kidd, Vice President Marketing & Communications APAC at Sinch. “What we see in this data reflects what’s happening locally: brands are investing in email and seeing strong returns, yet there is still a high number of messages that never reach inboxes. For instance, in a market as competitive and cost-conscious as Australia, marketers simply can’t afford for emails to get lost in inboxes. When budgets are under pressure, fixing deliverability is one of the fastest ways to unlock more value from the spend they already have.”AI adoption is widespread, but its impact remains uneven. Many teams focus on basic use cases such as content generation, while higher-impact applications such as optimisation, segmentation and deliverability remain underutilised. Organisations that use AI more effectively are significantly more likely to report improved email performance.Ginger Kidd said: "Across the diverse markets of APAC, we’re seeing a common theme: marketers are enthusiastically adopting AI, but the initial focus has primarily been on content creation. The true opportunity now lies in leveraging AI for smarter decision-making. For instance, who to send to, how often, and with what level of risk. This strategic shift is the key to ensuring every campaign improves performance, not just adds volume.“The most sophisticated teams are already using AI to predict which subscribers are at risk of disengaging, to fine-tune send times and to protect sender reputation. That’s where we’re seeing a real uplift in performance, not just faster content production.”Key findings of the report include:60% of companies measuring email ROI report returns above $10 for every $1 spentMore than 1 in 10 achieve returns as high as 40:146% say AI improves speed and efficiency41% of teams use AI to generate email content23% say AI has not improved their email programs49% report improved email performance year-over-year79% plan to maintain or increase investment in emailFewer than half of organisations can confidently measure email ROIAbout the reportThe Email Impact Report 2026 combines:Data from 400+ billion emails sent in 2025Insights from 1,200+ email senders globallyBenchmarks across 10 high-volume industriesRead more about the report here.About SinchSinch’s vision is to connect every business with every customer, everywhere in the world. With the industry’s most trusted foundation for intelligent customer communications, Sinch powers over 900 billion customer interactions annually for more than 200,000 customers across the globe. Leading global companies, including AI innovators, rely on Sinch to strengthen customer relationships and deliver seamless experiences across messaging, email and voice. Profitable since its founding in 2008, Sinch generated net sales of USD 3 billion (SEK 27 billion) in 2025 and has over 4,000 Sinchers in 60 countries, with headquarters in Stockholm. Sinch is listed on Nasdaq Stockholm (XSTO: SINCH). Visit us at sinch.com.About Sinch MailgunSinch Mailgun is the email infrastructure platform built for developers and businesses that demand reliable, high-performance delivery at scale. Trusted by companies worldwide, Mailgun powers transactional, marketing, and programmatic email through a developer-first API, advanced deliverability tools, and real-time analytics. As part of Sinch — the industry’s most trusted foundation for intelligent customer communications — Mailgun connects businesses to their customers through every send, at every scale. Visit us at mailgun.com.For more information, please contact:Tracey ChooCommunications Manager, APAC at SinchE-mail: tracey.choo@sinch.com Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

PHILADELPHIA, PA, Apr 22, 2026 - (ACN Newswire via SeaPRwire.com) - Datavault AI Inc. ("Datavault AI" or the "Company") (NASDAQ:DVLT), a leader in AI-driven data monetization, credentialing, digital engagement, and real-world asset ("RWA") tokenization technologies, today announced the issuance of U.S. Patent No. 12,596,819 and Notices of Allowance on two additional U.S. patent applications. This milestone builds directly on the Company's December 2025 issuance of two foundational patents for blockchain-driven content licensing and tokenized monetization - further expanding its robust intellectual property portfolio headlined by the industry-defining Carbon Credit Tokenization Patent.Key Highlights for InvestorsOne newly issued patent and two Notices of Allowance extend protection across three high-value platforms: AI-validated data valuation & monetization, tokenized virtual location funding, and automated tax return preparation for digital assets and DeFi-directly addressing 1099-DA compliance challenges.Reinforces the Company's Sumerian® Crypto Anchors, DataValue®, DataScore®, and Information Data Exchange® (IDE®) technologies with quantum-resistant encryption and blockchain immutability, underpinning a growing pipeline of tokenization contracts and licensing deals.Arrives as the first full IRS Form 1099-DA filing season closes amid reported operational hurdles-including late deliveries by Coinbase, Kraken, and Gemini-demonstrating clear demand for Datavault AI's automated, tokenized tax solutions.Enabled use cases include tokenized commodities (copper, gold, precious metals), agricultural/genomic/healthcare data assets, NIL digital twins, funded virtual biotech marketplaces, and intelligent tax automation-integrating natively with the Company's edge GPU fleet and HPC infrastructure.Directly supports Datavault AI's 2026 revenue target of at least $200 million, accelerates commercialization across fintech, healthcare, biotech, energy, agriculture, sports & entertainment, and Web3, and opens new licensing and partnership opportunities.Scope of the Latest ProtectionsU.S. Patent No. 12,596,819 - "Method and System for Data Valuation and Secure Commercial Monetization Platform" (issued): Covers an end-to-end permissioned platform spanning opt-in data contribution, AI-driven automated valuation, blockchain-tokenized storage in the Datavault®, and trading on open exchanges with flexible compensation pathways (sales, licenses, rewards, charitable contributions).U.S. Patent Application No. 17/842,220 - "System and Method for Funding a Virtual Location" (Notice of Allowance): Protects the funding, authentication, and tokenized operation of organization-specific virtual locations, including multi-currency donations, integrated event and asset tokenization, portfolio-aligned advertising, and compensation mechanisms for data contributors.U.S. Patent Application No. 17/507,459 - "Platform and Method for Preparing a Tax Return" (Notice of Allowance): Covers automated tax return preparation for clients and employees, with specialized tokenized return handling for digital asset and DeFi activity, back-end form processing, and dynamic adjustment to evolving tax codes-precisely targeting the reconciliation burdens and visibility gaps plaguing the inaugural 1099-DA season.Market Context & TailwindsThe filings position Datavault AI at the convergence of three rapidly expanding markets. Tokenized real-world assets have already surpassed $30 billion in on-chain value (RWA.xyz 2025 data), with Boston Consulting Group and ADDX projecting the global market to exceed $16 trillion by 2030. The global data monetization market is forecast to grow from $7.53 billion in 2024 to $18.8 billion by 2033 (10.7% CAGR, SkyQuest Technology). The new tax-preparation patent arrives precisely as U.S. taxpayers navigate the first full season under the IRS Form 1099-DA digital asset broker reporting regime-where gross proceeds reporting began January 1, 2025, and basis reporting for certain transactions took effect January 1, 2026-amid well-documented industry friction around late broker filings and cross-wallet/chain/DeFi reconciliation.Investor Implications & Strategic OutlookCollectively, the issued patents and allowed applications extend IP coverage around innovations that transform raw data into tokenized, tradable assets and enable transparent funding, monetization, and automated tax handling of virtual environments and digital asset portfolios. These technologies are expected to integrate seamlessly with Datavault AI's anticipated edge GPU fleet and high-performance computing infrastructure, accelerating AI valuation processing and tokenization contract execution."Securing this issued patent and receiving Notices of Allowance on two additional applications validates our leadership in turning intangible data into verifiable, monetizable capital, and in enabling organizations to fund and operate virtual worlds with full transparency and user compensation," said Nathaniel T. Bradley, Founder and Chief Executive Officer of Datavault AI. "These filings deepen our competitive moat and accelerate our path to capturing meaningful share in the data asset, real-world asset, and digital asset tax-preparation markets-directly fueling our $200 million 2026 revenue target and expanding pipeline of tokenization contracts."For additional insight into Datavault AI's growth strategy, commercialization roadmap, and long-term vision for unlocking value from data and intellectual property through tokenization and licensing, investors are encouraged to view the recent Nasdaq interview with CEO Nathaniel Bradley, hosted by Tech Edge and now available at https://vimeo.com/1176174810About Datavault AI Inc.Datavault AI™ (NASDAQ:DVLT) is a pioneer in AI-driven data experiences, valuation, and monetization of assets in the Web 3.0 environment. The Company's cloud-based platform delivers comprehensive solutions across its Acoustic Sciences and Data Sciences divisions. Datavault AI's Acoustic Sciences division features WiSA®, ADIO®, and Sumerian® patented technologies for spatial and multichannel wireless, high-definition sound transmission. The Data Science Division harnesses Web 3.0 and high-performance computing to enable experiential data perception, valuation, and secure monetization across industries, including sports & entertainment, biotech, education, fintech, real estate, healthcare, energy, and more. The Information Data Exchange® (IDE®) is a token exchange technology powered by Nasdaq Financial Infrastructure. The Company owns and operates exchanges, including International Elements Exchange (IEE), Sports Illustrated Exchange (SIx), New York Interactive Advertising Exchange (NYIAX), and American Political Exchange (APE). The Company is headquartered in Philadelphia, PA. Learn more at https://www.dvlt.ai.Forward-Looking Statements: This press release contains "forward-looking statements" within the meaning of Section 27A of the Securities Act of 1933, as amended, Section 21E of the Securities Exchange Act of 1934, as amended, and the Private Securities Litigation Reform Act of 1995. All statements other than statements of historical fact contained in this press release, including statements regarding the Company's future operations, financial position, prospects, plans, objectives, expectations, and intentions, are forward-looking statements. Words such as "anticipate," "believe," "could," "estimate," "expect," "intend," "may," "plan," "potential," "predict," "project," "should," "target," "will," "would," and similar expressions are intended to identify forward-looking statements, although not all forward-looking statements contain these identifying words. Forward-looking statements in this release include, but are not limited to, statements regarding: (i) the ultimate issuance, scope, validity, and enforceability of U.S. Patent Application No. 17/842,220, U.S. Patent Application No. 17/507,459, and any related foreign or continuation applications; (ii) the commercial value, market adoption, and revenue contribution of the Company's patented and patent-pending technologies, including DataValue®, DataScore®, the Information Data Exchange® (IDE®), Sumerian® Crypto Anchors, and the Datavault® platform; (iii) the Company's ability to achieve its 2026 revenue target of at least $200 million; (iv) the Company's pipeline of tokenization contracts, licensing arrangements, and strategic partnerships; (v) the size, growth, and timing of the markets for tokenized real-world assets, data monetization, and digital-asset tax preparation; (vi) the integration and performance of the Company's anticipated edge GPU fleet and high-performance computing infrastructure; and (vii) the demand for automated tax-preparation solutions arising from IRS Form 1099-DA reporting requirements.These forward-looking statements are based on management's current expectations and assumptions and are subject to significant risks, uncertainties, and other factors that could cause actual results to differ materially from those expressed or implied. Such risks include, among others: the U.S. Patent and Trademark Office issuing claims narrower than those allowed or rejecting allowed claims on reexamination; delays or failures in commercializing the Company's patented and patent-pending technologies; the Company's ability to attract and retain customers, licensees, and exchange partners; competition from existing and emerging technologies; cybersecurity, blockchain protocol, and quantum-computing risks; changes in U.S. federal and state tax law affecting digital-asset reporting, including modifications to the Form 1099-DA regime; regulatory developments affecting digital assets, securities, data privacy, and tokenized real-world assets; the Company's ability to raise additional capital on acceptable terms; macroeconomic and capital-markets conditions; and the other risk factors discussed under the heading "Risk Factors" in the Company's Annual Report on Form 10-K for the fiscal year ended December 31, 2025, and in subsequent Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and other filings made with the U.S. Securities and Exchange Commission (the "SEC"), copies of which are available free of charge on the SEC's website at www.sec.gov.Except as required by applicable law, the Company undertakes no obligation, and expressly disclaims any duty, to update or revise any forward-looking statement, whether as a result of new information, future events, changed circumstances, or otherwise. Investors and security holders are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this release. The Company gives no assurance that it will achieve its expectations. This release does not constitute an offer to sell, or the solicitation of an offer to buy, any security. Any forward-looking statements regarding potential acquisitions, dispositions, joint ventures, strategic alliances, licensing transactions, or similar arrangements are subject to the negotiation, execution, and consummation of definitive agreements and the satisfaction of customary closing conditions, and no assurance can be given that any such transaction will be completed on the terms contemplated, on the timing anticipated, or at all.Industry and Market Data: This press release contains industry, market, and competitive position data, including statistics, forecasts, and projections, that are based on or derived from independent industry publications, third-party research, surveys, and reports, including data attributed to RWA.xyz, Boston Consulting Group, ADDX, SkyQuest Technology, and the U.S. Internal Revenue Service. The Company has not independently verified the accuracy or completeness of any such third-party information and makes no representation or warranty, express or implied, as to its reliability. Industry publications and forecasts of this nature are inherently subject to assumptions, methodological limitations, and uncertainties, and projections, estimates, and beliefs based on such data may not prove to be accurate. Actual market size, growth rates, and the Company's position within these markets may differ materially from the figures presented herein.Trademarks, Trade Names, Service Marks and Copyrights: Datavault AI™, DataValue®, DataScore®, Information Data Exchange®, IDE®, Datavault®, WiSA®, ADIO®, and Sumerian® are trademarks, service marks, or registered trademarks of Datavault AI Inc. in the United States and/or other jurisdictions. This press release also refers to trademarks, service marks, trade names, and copyrights owned by other companies, including those of Coinbase, Kraken, Gemini, and Nasdaq. Solely for convenience, certain of the trademarks, service marks, trade names, and copyrights referred to in this press release may be listed without the ™, ®, ©, or SM symbols, but the Company will assert, to the fullest extent under applicable law, its rights to its own trademarks, service marks, trade names, and copyrights. The use or display of other parties' trademarks, service marks, trade names, or copyrights is not intended to and does not imply a relationship with, or endorsement or sponsorship by, the Company of any such third party.Media Contact:marketing@dvlt.aiInvestor Contact:Edward BargerVP Investor Relationsebarger@dvlt.ai | ir@dvlt.aiSOURCE: Datavault AI Inc Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

Brisbane, Queensland, Australia--(ACN Newswire via SeaPRwire.com - April 22, 2026) - Graphene Manufacturing Group Ltd (TSXV: GMG) (OTCQX: GMGMF) ("GMG" or the "Company") is pleased to announce that Stuart Watson — former global Head of Technical Development for Rio Tinto Ltd. (ASX: RIO), one of the largest mining and mineral production companies in the world, has joined GMG as Chief Production Growth Officer.Stuart has over 30 years of global leadership experience in metals and mining and oil and chemicals, including 20 years at Rio Tinto, across operations, sales and marketing, mergers and acquisitions, and technology development and innovation. Career highlights include:Leading and delivering multiple major transformation programs valued over US$5 Billion and merger and acquisition deals valued at US$1 Billion.Directing US$1 Billion in global technology and research & development spend to create breakthrough growth options and projectsBuilding high-performing global teams across Asia, Europe, and North AmericaStuart has a Master of Business Administration (MBA) - Henley Management College, UK; is a Chartered Engineer - Institute of Chemical Engineers (IChemE), has a Masters of Engineering, Chemical Engineering (First Class Honours) — Imperial College, University of London and Ecole Nationale Supérieure d'Ingénieurs de Génie Chimique (ENSIGC), Toulouse, France.Craig Nicol, CEO & Managing Director of the Company, commented "We welcome Stuart to the GMG team - he is a great addition to the Senior Executive Team for both executive leadership and delivery capability. I will enjoy working with Stuart to expand our production across our graphene and graphene products around the world."Jack Perkowski, Non-Executive Chairman and Director of the Company, commented: "On behalf of the board I welcome Stuart to the team and look forward to the progress around expanding our production capability into North America."Operations UpdateGMG is focused on delivering its Gen 2.0 Graphene Production Project (the "Gen 2.0 Project") by end of June 2026 — which is expected to produce at least 10 tonnes per annum of graphene at its headquarters in Richlands, Queensland, Australia.Once the Gen 2.0 Project is commissioned and operating. GMG plans to replicate and establish other production plants around the world to enable scaled production for potential sales, diversify and lower production risks, and in the end, reduce operating costs by locating the plant in countries with lower operating costs, including low cost natural gas — one of GMG's key production input costs.Currently, GMG is planning three potential expansion projects — two in North America (potentially one in US and one in Canada) in addition to an expansion production project in Australia. GMG proposes to mature these projects and expand production in line with sales for all of its products.The expansion program for GMG includes the following 5 production plants:Graphene Production (from natural gas)Coating Blend Plant (for the graphene coating THERMAL-XR®)Lubricant Blend Plant (for the graphene lubricant additive G® LUBRICANT)Graphene Slurry Plant (for the SUPA G Lithium-Ion Battery Additive)Battery Assembly Plant (for the Graphene Aluminium Ion Battery)Figure 1To view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/8082/293781_d1c07d1d84356a2d_001full.jpgAbout GMG:GMG is an Australian based clean-technology company which develops, makes and sells energy saving and energy storage solutions, enabled by graphene manufactured via in house production process. GMG uses its own proprietary production process to decompose natural gas (i.e. methane) into its natural elements, carbon (as graphene), hydrogen and some residual hydrocarbon gases. This process produces high quality, low cost, scalable, 'tuneable' and low/no contaminant graphene suitable for use in clean-technology and other applications.The Company's present focus is to de-risk and develop commercial scale-up capabilities, and secure market applications. In the energy savings segment, GMG has initially focused on graphene enhanced heating, ventilation and air conditioning ("HVAC-R") coating (or energy-saving coating) which is now being marketed into other applications including electronic heat sinks, industrial process plants and data centres. Another product GMG has developed is the graphene lubricant additive focused on saving liquid fuels initially for diesel engines.In the energy storage segment, GMG and the University of Queensland are working collaboratively with financial support from the Australian Government to progress R&D and commercialization of graphene aluminium-ion batteries ("G+AI Batteries"). GMG has also developed a graphene additive slurry that is aimed at improving the performance of lithium-ion batteries.GMG's 4 critical business objectives are:Produce Graphene and improve/scale cell production processesBuild Revenue from Energy Savings ProductsDevelop Next-Generation BatteryDevelop Supply Chain, Partners & Project Execution CapabilityFor further information please contact:Craig Nicol, Chief Executive Officer & Managing Director of the Company at craig.nicol@graphenemg.com, +61 415 445 223Leo Karabelas at Focus Communications Investor Relations, leo@fcir.ca, +1 647 689 6041Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this news release.Cautionary Note Regarding Forward-Looking StatementsThis news release includes certain statements and information that may constitute forward-looking information within the meaning of applicable Canadian and U.S. securities laws. Forward-looking statements relate to future events or future performance and reflect the expectations or beliefs of management of the Company regarding future events. Generally, forward-looking statements and information can be identified by the use of forward-looking terminology such as "intends", "believes" "expects" or "anticipates", or variations of such words and phrases or statements that certain actions, events or results "may", "could", "should", "would" or will "potentially" or "likely" occur. This information and these statements, referred to herein as "forward‐looking statements", are not historical facts, are made as of the date of this news release and include without limitation, statements as to GMG's focus on, and the timing and production expectations of, the Gen 2 Project, intentions regarding the number, purpose and location of expansion projects, intentions to de-risk and develop commercial scale-up capabilities, GMG's focus in the energy savings segment, GMG's intentions for the use of graphene lubricant additive on saving liquid fuels, expectations for R&D and commercialization of G+AI Batteries, GMG's ability to improve the performance of lithium-ion batteries and GMG's critical business objectives.Such forward-looking statements are based on a number of assumptions of management, including the patent and potential market size of G® LUBRICANT. Additionally, forward-looking information involves a variety of known and unknown risks, uncertainties and other factors which may cause the actual plans, intentions, activities, results, performance or achievements of GMG to be materially different from any future plans, intentions, activities, results, performance or achievements expressed or implied by such forward-looking statements. Such risks include, without limitation that GMG does not receive or receive on a timely basis the fully signed consent notice from the and the risk factors set out under the heading "Risk Factors" in the Company's annual information form dated November 4, 2025 available for review on the Company's profile at www.sedarplus.ca.Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial out-look that are incorporated by reference herein, except in accordance with applicable securities laws.To view the source version of this press release, please visit https://www.newsfilecorp.com/release/293781 Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

Transaction will create a global powerhouse for mining finance and reduce complexity and costs for Canadian market participantsAcquisition will strengthen TMX's ability to serve clients across the capital markets ecosystem, expands global presence, accelerates growth strategyAnalyst webcast and conference call on Wednesday, April 22, 2026 at 8:00am EDT to discussToronto, Ontario--(ACN Newswire via SeaPRwire.com - April 22, 2026) - TMX Group Limited (TSX: X) (TMX Group) announced today an agreement to acquire Middlebury Holdings Pty. Limited (Cboe Australia) and Cboe Canada Holdings, ULC (Cboe Canada) from Cboe Global Markets, Inc. for US$300 million ($409 million*) in total consideration, a transaction that will bolster TMX's ability to serve clients across the capital markets ecosystem, expand the company's global presence, and accelerate the company's growth strategy, while reducing cost and complexity for Canadian market participants."We are tremendously excited to announce the acquisition of Cboe Australia and Cboe Canada, a deal that represents a unique opportunity to strengthen our domestic marketplace for clients and the entire stakeholder ecosystem, while expanding the reach and impact of our presence in a region of the world we know well," said John McKenzie, Chief Executive Officer, TMX Group. "We look forward to working with our industry partners to ensure a smooth transition, and to exploring innovative ways to serve the needs of issuers and investors across the Australian market, while continuing to seek out opportunities to accelerate our enterprise growth strategy."Cboe Australia and Cboe Canada offer equities trading venues, listing venues and market data solutions. Cboe Australia is an innovative securities exchange offering companies strategic tailored support for public market listings, including ETFs, as well as structured products and warrants, and providing a trading venue for brokers and investors with efficient and cost-effective access to local and global investment opportunities. Cboe Australia was also recently granted a license for corporate listings. Cboe Canada includes MATCHNow, NEO-L, NEO-N, and NEO-D, as well as ETF, CDR and corporate listings."The teams at Cboe Australia and Cboe Canada have delivered consistent performance and built resilient, high-quality markets," said Craig Donohue, Chief Executive Officer, Cboe Global Markets. "These businesses are well positioned for their next chapter, and we will work closely with TMX, our local regulators, and our clients to ensure a seamless transition."Transaction HighlightsTMX's acquisition of Cboe Australia will bring together the world's leading mining and energy transition financing ecosystems, unlocking potential to innovate for a growing global client base.TMX's acquisition of Cboe Canada enhances the quality of client experience across domestic equities marketplaces:Increasing efficiency of access to capital and liquidity for Canadian issuers, andReducing direct and indirect costs for participants, while improving execution quality and resiliency.Transaction expected to be accretive to adjusted earnings per share within the first 12 months of closing, excluding synergies.Revenue growth expected to be in-line with TMX's long-term financial objectivesCombined Cboe Canada and Cboe Australia businesses delivered revenue of approximately $87 million in 2025, and adjusted EBITDA of approximately $25 million**.Further Transaction DetailsThe purchase of each business is subject to regulatory approvals and customary closing conditions in Australia and Canada. The two components of this acquisition, Cboe Australia and Cboe Canada, are expected to close separately, each after required approvals have been obtained.Canaccord Genuity and Macquarie Capital are acting as financial advisors to TMX Group. FGS Longview is acting as strategic communications advisor to TMX Group.*Based on USD/CAD exchange rate of 1.3644 at April 21, 2026. Actual amounts in Canadian dollars are subject to change.**Based on average AUD/CAD of 0.90 for 2025. Cboe Australia and Canada revenue and EBITDA are compilations of financial information provided to us for the Cboe entities as of December 31, 2025. The Cboe financial information is unaudited and prepared in accordance with IFRS (Cboe Canada) or Australian Accounting Standards (Cboe Australia) for public companies.Teleconference / Audio WebcastTMX Group will host a teleconference / audio webcast to discuss the transaction.Time: 8:00 a.m. - 9:00 a.m. ET on Wednesday, April 22, 2026Participants may access the conference call via the webcast link: https://www.gowebcasting.com/14669.The audio webcast of the conference call and investor presentation will also be available on TMX Group's website at www.tmx.com, under Investor Relations.Alternatively, participants may join the live call by dialing 1-833-752-4317 or 1-647-846-2266.An audio replay of the conference call will be available at 1-855-669-9658 or 1-412-317-0088, [access code 6830744].Caution Regarding Forward-Looking InformationThis press release of TMX Group Limited ("TMX Group", "us", "we", "our") contains "forward-looking information" (as defined in applicable Canadian securities legislation) that is based on expectations, assumptions, estimates, projections and other factors that management believes to be relevant as of the date of this press release. Often, but not always, such forward-looking information can be identified by the use of forward-looking words such as "plans", "expects", "projects", "is expected", "projected", "budget", "scheduled", "targeted", "estimates", "forecasts", "intends", "anticipates", "believes", or variations or the negatives of such words and phrases or statements that certain actions, events or results "may", "could", "would", "might" or "will" be taken, occur or be achieved or not be taken, occur or be achieved. Forward-looking information, by its nature, requires TMX Group to make assumptions and is subject to significant risks and uncertainties which may give rise to the possibility that our expectations or conclusions will not prove to be accurate and that our assumptions may not be correct. Examples of forward-looking information in this press release include, but are not limited to, the anticipated benefits of the transactions to TMX Group, Cboe Canada and Cboe Australia; the expected impact on TMX Group's earnings and Adjusted earnings per share; expectations regarding the revenue growth of Cboe Canada and Cboe Australia; the ability to integrate Cboe Canada and Cboe Australia into TMX Group and the potential synergies; the expected impact on TMX's long-term growth strategy and transformational objectives; the potential for geographic expansion; the ability for TMX Group to accelerate Cboe Canada and Cboe Australia's growth; the timing and receipt of regulatory approval; and closing of the transaction, each of which is subject to a number of significant risks and uncertainties. These risks include, but are not limited to: competition from other exchanges or marketplaces, including alternative trading systems and new technologies, on a national and international basis; dependence on the economies of Canada, the United States and Australia; adverse effects on our results caused by global economic conditions (including geopolitical events, interest rate movements or threats of recession) or uncertainties including changes in business cycles that impact our sector; failure to retain and attract qualified personnel; geopolitical and other factors which could cause business interruption; dependence on information technology; vulnerability of our networks and third party service providers to security risks, including cyber attacks; failure to properly identify or implement our strategies; regulatory constraints; constraints imposed by our level of indebtedness, risks of litigation or other proceedings; dependence on adequate numbers of customers; failure to develop, market or gain acceptance of new products; failure to close and effectively integrate acquisitions, including the Cboe Canada and Cboe Australia acquisition, to achieve planned economics or divest underperforming businesses; currency risk; adverse effect of new business activities; adverse effects from business divestitures; not being able to meet cash requirements because of our holding company structure and restrictions on paying inter-corporate dividends; dependence on third party suppliers and service providers; dependence of trading operations on a small number of clients; risks associated with our clearing operations; challenges related to international expansion; restrictions on ownership of TMX Group common shares; inability to protect our intellectual property; adverse effect of a systemic market event on certain of our businesses; risks associated with the credit of customers; cost structures being largely fixed; the failure to realize cost reductions in the amount or the time frame anticipated; dependence on market activity that cannot be controlled; the regulatory constraints that apply to the business of TMX Group and its regulated subsidiaries, costs of on exchange clearing and depository services, trading volumes (which could be higher or lower than estimated) and the resulting impact on revenues; future levels of revenues being lower than expected or costs being higher than expected.Forward-looking information is based on a number of assumptions which may prove to be incorrect, including, but not limited to, assumptions with respect to the impact of the cost of acquisition financing on adjusted earnings per share; assumptions in connection with the ability of TMX Group to successfully compete against global and regional marketplaces and other venues; business and economic conditions generally; exchange rates (including estimates of exchange rates from Canadian dollars to the U.S. dollar, British pound sterling, or Australian dollar), commodities prices, the level of trading and activity on markets, and particularly the level of trading in TMX Group's key products; business development and marketing and sales activity; the continued availability of financing on appropriate terms for future projects; changes to interest rates and the timing thereof; productivity at TMX Group, as well as that of TMX Group's competitors; market competition; research and development activities; the successful introduction and client acceptance of new products and services; successful introduction of various technology assets and capabilities; the impact on TMX Group and its customers of various regulations; TMX Group's ongoing relations with its employees; and the extent of any labour, equipment or other disruptions at any of its operations of any significance other than any planned maintenance or similar shutdowns.In addition to the assumptions outlined above, forward looking information related to long term revenue CAGR objectives, and long term adjusted earnings per share CAGR objectives are based on assumptions that include, but not limited to:TMX Group's success in achieving growth initiatives and business objectives;continued investment in growth businesses and in transformation initiatives including next generation technology and systems;no significant changes to our effective tax rate, and number of shares outstanding;organic and inorganic growth in recurring revenuemoderate levels of market volatility over the long term;level of listings, trading, and clearing consistent with historical activity;economic growth consistent with historical activity;no significant changes in regulations;continued disciplined expense management across our business;continued re-prioritization of investment towards enterprise solutions and new capabilities;free cash flow generation consistent with historical run rate; anda limited impact from inflation, rising interest rates and supply chain constraints on our plans to grow our business over the long term including on the ability of our listed issuers to raise capital.While we anticipate that subsequent events and developments may cause TMX Group's views to change, TMX Group has no intention to update this forward-looking information, except as required by applicable securities law. This forward-looking information should not be relied upon as representing TMX Group's views as of any date subsequent to the date of this press release. TMX Group has attempted to identify important factors that could cause actual actions, events or results to differ materially from those current expectations described in forward-looking information. However, there may be other factors that cause actions, events or results not to be as anticipated, estimated or intended and that could cause actual actions, events or results to differ materially from current expectations. There can be no assurance that forward-looking information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking information. These factors are not intended to represent a complete list of the factors that could affect TMX Group. Important additional information identifying risks and uncertainties and other factors is contained in TMX Group's 2025 Annual Report under the headings entitled "Caution Regarding Forward-Looking Information" and "Enterprise Risk Management" which may be accessed at tmx.com in the Investor Relations section under Regulatory Filings.Non-GAAP Financial MeasuresThis press release includes references to financial measures that are not defined by GAAP. Although such non-GAAP measures are calculated according to accepted industry practice, such measures disclosed in this press release may be different from non-GAAP measures used by other companies. This data is intended to provide additional information and should not be considered in isolation or as a substitute for measures of performance prepared in accordance with GAAP. While TMX Group believes these measures provide investors with greater transparency and supplemental data relating to the transaction, readers are cautioned that these non-GAAP measures are not alternatives to measures determined in accordance with GAAP and should not, on their own, be construed as indicators of TMX Group's or Cboe Canada and Cboe Australia's future performance or profitability. Readers should not rely on any single financial measure when evaluating TMX Group's business or that of Cboe Canada and Cboe Australia. We use non-GAAP measures and non-GAAP ratios that do not have standardized meanings prescribed by GAAP and are, therefore, unlikely to be comparable to similar measures presented by other companies. Management uses these measures, and excludes certain items, because it believes doing so provides investors a more effective analysis of underlying operating and financial performance, including, in some cases, our ability to generate cash and our ability to repay debt. Management also uses these measures to more effectively measure performance over time, and excluding these items increases comparability across periods. The exclusion of certain items does not imply that they are non-recurring or not useful to investors.Adjusted earnings per share provided above is a non-GAAP ratio and does not have a standardized meaning prescribed by GAAP and is therefore unlikely to be comparable to similar measures presented by other companies. TMX Group presents Adjusted EPS and excludes, among other things, acquisition, integration, and related items; amortization of intangibles related to acquisitions; strategic re-alignment expenses; dispute, litigation and related items; and other items as disclosed in TMX Group's 2025 Annual Report. For more information on Adjusted EPS, including definitions and explanations of how these measures provide useful information, refer to Non-GAAP Measures in TMX Group's 2025 Annual Report.Adjusted EBITDA is calculated as net income excluding interest expense, income tax expense, depreciation and amortization, acquisition, integration, and related costs, one-time income (loss), and other significant items that are not reflective of the underlying business operations of Cboe Canada and Cboe Australia. Cboe Canada and Cboe Australia Adjusted EBITDA is a compilation of financial information provided to us for Cboe Canada and Cboe Australia entities as of December 31, 2025. The Cboe Canada and Cboe Australia financial information is unaudited and prepared in accordance with IFRS (Cboe Canada) or Australian Accounting Standards (Cboe Australia) for public companies. Adjusted EBITDA for Cboe Canada and Cboe Australia excludes certain items such as discontinued operations, transfer pricing, unrealized gains / losses, and one-time employee costs.About TMX Group (TSX: X) TMX Group operates global markets, and builds digital communities and analytic solutions that facilitate the funding, growth and success of businesses, traders and investors. TMX Group's key operations include Toronto Stock Exchange, TSX Venture Exchange, TSX Alpha Exchange, The Canadian Depository for Securities, Montréal Exchange, Canadian Derivatives Clearing Corporation, TSX Trust, TMX Trayport, TMX Datalinx, TMX VettaFi and TMX Newsfile, which provide listing markets, trading markets, clearing facilities, depository services, technology solutions, data products and other services to the global financial community. TMX Group is headquartered in Toronto and operates offices across North America (Montréal, Calgary, Vancouver and New York), as well as in key international markets including London, Singapore, and Vienna. For more information about TMX Group, visit www.tmx.com. Follow TMX Group on X: @TMXGroup.For more information please contact:Catherine KeeHead of Media RelationsTMX Group416-671-1704catherine.kee@tmx.comAmanda TangHead of Investor RelationsTMX Group416-895-5848amanda.tang@tmx.com To view the source version of this press release, please visit https://www.newsfilecorp.com/release/293729 Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com

HONG KONG, Apr 22, 2026 - (ACN Newswire via SeaPRwire.com) - Hengrui Pharma reported steady growth in the first quarter of 2026. In Q1 2026, the Company recorded revenue of RMB 8.14 billion, up 12.98% year-over-year, while net profit attributable to shareholders increased by 21.78% to RMB 2.28 billion. Innovative drugs remained the key growth driver, generating RMB 4.53 billion in revenue, up 25.75% year-over-year and accounting for 61.69% of total pharmaceutical sales.The Company continued to advance its innovation-driven strategy with sustained R&D investment and solid pipeline progress. R&D investments in Q1 2026 totaled RMB 2.22 billion, representing for approximately 27.32% of revenue.During the period, three innovative products and new indications were approved in China, which included an anti-PD-L1/TGF-βRII bi-functional fusion protein and an indication expansion for HER2-targeting ADC.In terms of pipeline advancement, the Company obtained 26 clinical trial approvals and had 8 new drug applications accepted in China across key therapeutic areas including oncology, metabolic, cardiovascular, and immunological diseases.Business development has become a recurring and increasingly important growth driver, with RMB 787 million in out-licensing revenue recognized during the quarter, primarily from the collaboration with GSK. Since 2023, Hengrui Pharma has completed 12 overseas business development transactions, including out-licensing, NewCo structures, and strategic alliance models.A key milestone during the period was the successful Nasdaq listing of Kailera Therapeutics (NASDAQ: KLRA), a NewCo company built around Hengrui Pharma’s GLP-1-based assets. This milestone reflects continued progress in executing the Company’s NewCo strategy, with Hengrui and Kailera working together to advance the global development of the GLP-1 portfolio.Looking ahead, Hengrui Pharma will remain committed to innovation and globalization, strengthening its pipeline and advancing the development and commercialization of innovative therapies to benefit patients worldwide. Copyright 2026 ACN Newswire via SeaPRwire.com. All rights reserved. www.acnnewswire.com